Command drivers download

command drivers overview « 1 - 20 » of 1000 drivers

... Fixed Command Rate abnormality.Abit A-S78H Bios 12 ...

... 533MHz FSBSupports Intel Hyper-Threading Technology Express ChipsetIntel 915P ... Intel ICH6R Express ChipsetSupports Hi-Speed Universal Serial Bus (USB 2.0 ... Un-buffered Non-ECC DIMM)Supports Dual channel DDR 400 ... PCI Express x16 graphicsPCI Express x16 graphics delivers up to 8GB ...

... CAS Latency and Command rate ... now works as intended without problems.Abit AN9 Serie 1.1 ...

... issue that with certain VGA card does not work with four 1GB RAM modules. 2. DRAM Command ... Refresh Cycle Time, Read to Write Delay now work as intended. 3. Recalibrate CPU temperature. 4. System ...

... work with four 1GB RAM modules. 2. DRAM Command Rate, Row Refresh Cycle Time, Read to Write ... 4X, IEEE1394 and Gigabit LAN including ABIT engineered ...

... 1. Support new DRAM Command Rate adjusting function for ADA3700DKA5CF and ADA4000DKA5CF.2. Enhanced ... 2006ABIT AV8 Series BIOS 2.8 ...

... Supports Socket AM2 Processor with 2GHz system bus using Hyper Transport ... SPP 190. Supports Dual channel DDR2 800 ... 1. Support AN9 32X. 2. Support DRAM ... CAS Latency and Command rate ... adjusted function. 3. The function ...

... 1. Fixed an issue where the system sometimes may hangs on POST code 50 and ... 6D.2. The DRAM command rate adjusting function now works as intended.3. BIOS ...

... 1. Added new option "SATA RAID ROM ... to setup the BIOS of onboard and on-chip SATA. 2. Revised setup menu for on-chip Serial ATA. ... 3. Fixed IOMEGA USB-ZIP 250 boot issue. 4. Added SVID ... SDID for IC7 and IC7-G respectively. 5. Added "Intel on-screen branding ...

... 1. Added new option "SATA RAID ROM ... to setup the BIOS of onboard and on-chip SATA. 2. Revised setup menu for on-chip Serial ATA. ... 3. Fixed IOMEGA USB-ZIP 250 boot issue. 4. Added SVID ... disabled. 6. Added new options ... for system performance. 7. Fixed on-chip SATA boot issue while another bootable hard drives exist ...

... 1. Enhanced the IEEE1394 performance.2. Add FP-Audio function.3. Add DRAM Command Rate Function.4. Support Wolfdale Processor.5. BIOS ...

... 1. Support CL ... 3.2. Enhanced compatibility with certain memories.3. Support Command Rate adjusting function.4. Update Jmicron BIOS to V1.06.69.5. ... CPU Support Intel® Core ... Support Intel® Core ... Chipset Intel® P35 Express ...

... New Fixes/FeaturesAdded support for IS7-G, IS7, and IS7-E. ... Updated CPU micro code (CPU: 0F29H, ID ... Added CPU multiplier 8X for engineering sample CPU and maximum CPU frequency 412MHz. ... BIOS hang-up problem which is caused by specific CPU cooling fan reporting error RPM to BIOS when ...

... New Fixes/FeaturesAdded support for IS7-G, IS7, and IS7-E. ... Updated CPU micro code (CPU: 0F29H, ID ... Added CPU multiplier 8X for engineering sample CPU and maximum CPU frequency 412MHz. ... BIOS hang-up problem which is caused by specific CPU cooling fan reporting error RPM to BIOS when ...

... 1. Fixed Command rate function abnormality. 2. Fixed DRAM Timing abnormal. 3. Update JMB363 ROM version. ... 4. Fixed twice boot issue. 5. Enhanced Intel 45nm CPU compatibility. 6. BIOS compiled date ... 45 nm CPU ready ...

... Dual Core Chipset Intel ... 240-pin DIMM sockets support max. memory capacity 8GBSupports Dual channel DDR3 1333 ... 667 Un-buffered Non-ECC memoryLAN On board PCI Gigabit LAN controller supports 10 ... 1000M Ethernet Audio On board 7.1 CH Dolby ...

... Please use the AWDFLASH v8.24F flash utility to update the KD7A BIOS. 2. Beep before boot. 3. ... Changed ROMSIP table to enhance performance. 4. Changed default third boot device to CDROM. 5. Changed default ... item and set default to Disable ... SATA RAID cards. 7. Fixed an issue where "CPU Fast Command Decode ...

... CAS Latency and Command rate ... adjusting function. 3. The AuxFan2 now works as intended after resuming from S3. 4. The ... now works as intended. 5. Fixed the issue that the system sometimes ... not be able to boot when install the CPU A64 X2 3800 ... 6. Fixed the issue that the CPU Vcore of Sempron 3000 were not correctly. 7. ...

... CAS Latency and Command rate ... adjusting function.3. The AuxFan2 now works as intended after resuming from S3.4. The ... now works as intended.5. Fixed the issue that the system sometimes may ... not be able to boot when install the CPU A64 X2 3800 ... .6. Fixed the issue that the CPU Vcore of Sempron 3000 were not correctly.7. BIOS ...

... CAS Latency and Command rate ... adjusted function. 2. Fixed the issue that the system may hang on POST. code 50 when the ... Socket AM2 Processor with 2GHz system bus using Hyper Transport Technology, NVIDIA nForce 570 ... SLI MCP, Dual channel DDR2 800, Two PCI-Express X16 slots support NVIDIA Scalable ...