Download Zyxel drivers

«« « 12 » »»

Wi-Fi Multimedia (WMM) Support Wireless Security: WEP, WPA, WPA-PSK, WPA2, WPA2-PSK, 802.1x WPS hardware button, WPS software feature Soft AP mode support Wireless green feature Automatically adjust wireless output power by detecting the distance between NWD2205 and wireless access point Enter power-saving mode when no traffic - Hardware Operation voltage: DC 5V

wpsZyXEL NWD2205 WLANNWD2205 WLANaccessbuttonmodeZyXELwirelesspointenterdetectingNWD2205NWD2205 USB WLANwpapskwpaWLAN

Wi-Fi Multimedia (WMM) support Wireless security WEP, WPA (WPA-PSK), WPA2 (WPA2-PSK), 802.1x WPS hardware button, WPS software feature Soft AP mode support Wirless peer-to-peer connection support - Hardware Operation voltage: DC 5V One WPS button with Link/Act LED One USB 1.1/2.0 port

NWD2105peertopeerwpapskWLANwpsbuttonNWD2105 USB WLANwpaZyXELsupportmodeZyXEL NWD2105 WLANfeaturesoftconnectionNWD2105 WLAN

- A DOS installation/help program, DIAG.EXE, is provided for ease of setup for normal users. DIAG.EXE will provide information on driver installation for the appropriate network operating systems.

diagexeoperatingFN312FN312 LANinstallationprogramZyXEL FN312 LANdirectoryZyXEL FN312 EthernetrootnetworkZyXEL

- Support Wi-Fi Direct for Windows XP/ Vista/ 7

vistaWLANsupportfixeswifiZyXELNWD310N WLANZyXEL NWD310N WLANwindowsNWD310N PCI WLANNWD310N

8. DUT connect to AP with profile successfully. Then DUT disconnected and start OTIST function. DUT couldn’t connect to AP which is running OTIST function and show wrong setup key error message. 9. IOP: P-2602HWL-D1A wireless QoS function(by application port) isn’t noticeable sometimes if wireless clients are ZyXEL G-120/AG-120/G-320H/AG-320 (chipset: ZD1212B, driver: 1.5.4.6). (If clients are Intel 2200 or 2915 chipset, driver: 9.0.4.17, the QoS function works normally.) 10. In all OS, sometimes GUI-> Survey function works failure, survey list becomes empty. (If the neighbor AP’s SSID numbers are more than 50, this issue usually happened.) 11. In PQA_SW1 tester office (Neighbor AP more than 50), the ZyDAS ZD1212b chipset DUT (G-120/G-320H/AG-120/AG-320 driver: v1.5.4.6) connected ability is weak, many features sometimes can’t work normally. (Ex: Site survey、OTIST、WPA、WPA2…..) 12. In Vista/Vista64, utility initial time takes approximately 1.5 to 2 minute. 13. If ZyXEL P-335U works on WPA/WPA2 mode, the re-authentication timer is “600” seconds. It’s more than 3 minutes that DUT couldn’t associate to AP automatically after “re-authentication”. This issue occurs on all OS. Notes: 1. No Refresh icon in Site Survey and Profile page. 2. It does not support when security is 802.1x and dynamic WEP key is disabled. 3. If SSID’s length is more than 23, OTIST can’t work.

otistdutissuemodeZyXEL AG-120 Wireless LANWLANcanrsquotZyXEL AG-120 WLANAG-120 WLANAG-120ZyXELVista

This file contains a compressed (or zipped) set of files. Download the...

NWD271NunzipNWD271N WLANfileWLANrunsetZyXEL NWD271N WLANZyXELinstructionsfilesdoubleclick

- [Modified] Driver Version 3.2.0.5. 2. Utility Changed.

supportversionWLANZyXEL NWD-211AN WLANchangedNWD-211AN USB WLANfeaturewlanNWD-211AN WLANZyXELmodifiedNWD-211ANadd

7. Manual Start OTIST, DUT still could connect AP without OTIST start. DUT should disconnect to AP. 8. DUT connect to AP with profile successfully. Then DUT disconnected and start OTIST function. DUT couldn’t connect to AP which is running OTIST function and show wrong setup key error message. 9. IOP: P-2602HWL-D1A wireless QoS function(by application port) isn’t noticeable sometimes if wireless clients are ZyXEL G-120/AG-120/G-320H/AG-320 (chipset: ZD1212B, driver: 1.5.4.6). (If clients are Intel 2200 or 2915 chipset, driver: 9.0.4.17, the QoS function works normally.) 10. In all OS, sometimes GUI-> Survey function works failure, survey list becomes empty. (If the neighbor AP’s SSID numbers are more than 50, this issue usually happened.) 11. In PQA_SW1 tester office (Neighbor AP more than 50), the ZyDAS ZD1212b chipset DUT (G-120/G-320H/AG-120/AG-320 driver: v1.5.4.6) connected ability is weak, many features sometimes can’t work normally. (Ex: Site survey、OTIST、WPA、WPA2…..) 12. In Vista/Vista64, utility initial time takes approximately 1.5 to 2 minute. 13. If ZyXEL P-335U works on WPA/WPA2 mode, the re-authentication timer is “600” seconds. It’s more than 3 minutes that DUT couldn’t associate to AP automatically after “re-authentication”. This issue occurs on all OS. Notes: 1. No Refresh icon in Site Survey and Profile page. 2. It does not support when security is 802.1x and dynamic WEP key is disabled.

modedutAG-320 WLANZyXEL AG-320 WLANWLANotistAG-320issueVistaZyXEL AG-320 Wireless LANZyXELcanrsquot

Independent operation empowered by intelligent management is the key requirement for small businesses. Security is one of the most important issues for small businesses while deploying in a network environment, however, the additional cost that comes with this security is also a concern.

networkGS1510-24 SwitchsmallsecuritybusinessesGS1510-24seriesZyXEL GS1510-24 SwitchSwitchZyXEL

7. Manual Start OTIST, DUT still could connect AP without OTIST start. DUT should disconnect to AP. 8. DUT works on Ad-Hoc mode, the throughput is lower than criterion. 9. IOP: P-2602HWL-D1A wireless QoS function(by application port) isn’t noticeable sometimes if wireless clients are ZyXEL G-120/AG-120 (chipset: ZD1212B, driver: 1.5.4.6). 10. In real world environment, DUT(Vista wireless utility) can’t associate to AP (WPA/WPA2/WPA-PSK/WPA2-PSK) with (P-335U v 360_AMB0_C0) sometimes and 802.1 x modes (ZyAIR G-3000H v3.50_AAH3_C0) sometimes. 11. In all OS, sometimes GUI-> Survey function works failure, survey list becomes empty. (If the neighbor AP’s SSID numbers are more than 50, this issue usually happened.) 12. In PQA_SW1 tester office (Neighbor AP more than 50), the ZyDAS ZD1212b chipset DUT (G-120/G-320H/AG-120/AG-320 driver: v1.5.4.6) connected ability is weak, many features sometimes can’t work normally. (Ex: Site survey?OTIST?WPA?WPA2…..) 13. In Vista/Vista64, utility initial time takes approximately 1.5 to 2 minute. 14. If ZyXEL P-335U works on WPA/WPA2 mode, the re-authentication timer is “600” seconds. It’s more than 3 minutes that DUT couldn’t associate to AP automatically after “re-authentication”. This issue occurs on all OS. 15. (DUT Vista driver with Microsoft Vista utility)-> After overnight stress test on WPA-PSK mode, wireless STA1 (Vista32) crash and wireless STA2 (Vista64) disconnect to AP sometimes; (DUT Vista driver with DUT utility v2.0.0b2?v.2.0.0b3?v2.0.0b4)-> After overnight stress test on WPA-PSK mode, two wireless clients FTP transmission broke off. Notes:

vistamodeutilityG-120ZyXEL G-120 Wireless LANZyXEL G-120 WLANG-120 WLANwirelessdutWLANZyXELcanrsquot

Wi-Fi Multimedia (WMM) support Wireless security WEP, WPA (WPA-PSK), WPA2 (WPA2-PSK), 802.1x WPS hardware button, WPS software feature Soft AP mode support Wirless peer-to-peer connection support - Hardware Operation voltage: DC 5V One WPS button with Link/Act LED One USB 1.1/2.0 port

wpapsksupportfeaturesoftNWD2105 WLANbuttonmodeZyXELwpswpaZyXEL NWD2105 WLANpeertopeerWLANNWD2105 USB WLANNWD2105connection

1. When NWD6605 connect to 802.11AC AP/Router, the Windows Zero Configuration will be disconnected for a second then connect again due to transferring to USB3.0 mode.

NWD6605 WLANNWD6605NWD6605 USB WLAN AdapterWLANcanrsquotnwdpcsZyXEL NWD6605 WLANwindowsZyXELshowconnectssid

- A DOS installation/help program, DIAG.EXE, is provided for ease of setup for normal users. DIAG.EXE will provide information on driver installation for the appropriate network operating systems.

programGN680-TnetworkZyXEL GN680-T LANdiagexeinstallationdirectoryoperatingrootZyXEL GN680-T EthernetZyXELGN680-T LAN

Wi-Fi Multimedia (WMM) support Wireless security WEP, WPA (WPA-PSK), WPA2 (WPA2-PSK), 802.1x WPS hardware button, WPS software feature Soft AP mode support Wirless peer-to-peer connection support - Hardware Operation voltage: DC 5V One WPS button with Link/Act LED One USB 1.1/2.0 port

connectionwpapskbuttonwpaZyXEL NWD2105 WLANWLANNWD2105wpsZyXELmodefeaturesoftpeertopeerNWD2105 WLANsupport

Independent operation empowered by intelligent management is the key requirement for small businesses. Security is one of the most important issues for small businesses while deploying in a network environment, however, the additional cost that comes with this security is also a concern.

SwitchZyXEL GS1510-16 SwitchsmallGS1510-16networkbusinessesseriesGS1510-16 SwitchsecurityZyXEL

- Data Rate (Automatic Fallback) 54M/48M/36M/24M/18M/12M/11M/9M/6M/5.5M/2M/1Mbps - Modulation Technique DBPSK/DQPSK/CCK/OFDM - Network Architecture Ad-Hoc Mode (Peer to Peer without AP) & Infrastructure Mode - Host Interface USB 2.0 - Antenna Internal patch antenna

peerZyXEL AG-220 Wireless LANghzwpaZyXELWLANtypicalfccplusmnAG-220modetaiwanZyXEL AG-220 WLANAG-220 WLANmbpsdbm

Known issues: 1. The NIC cannot scan itself from site survey when setup an ad-hoc. But other can do, even connect with it. After connected, it can do also. 2. Under OS 2000,XP and XP64 ,after DUT connect to an hidden AP,in Site Survey page it cannot scan the AP's SSID,and zero config is the same

ZyXEL NWD210N WLANNWD210NadhocwpapsknwdnconnectWLANNWD210N WLANZyXEL

3. Only base 64 format is supported for Trusted Root CA file, DES is not supported. 4. When DUT couldn't obtain IP address from DHCP driver. The DUT wouldn't configure. You must reset to default 5. While setting fixed IP address from wizard, the DUT didn’t re-direct web browser to new IP address UI automatically after finished the Wizard.

ZyXEL G-470 WLANZyXELaddressWireless Ethernet AdapterdutG-470didnrsquotredirectsupportedwizard

A. When AP is Belkin F5D8230 wireless pre n router, Tx/Rx throughput were only 2~6Mbps. B. The 11g Tx throughput can not reach 20Mbps on WinXP 64bit. C. In Ad-Hoc mode. DUT and ZyXEL AG-100. RX/ throughput was 14.521Mbps In Ad-Hoc mode. DUT and LinkSys Dual-Band Wireless A+G Notebook. RX/throughput was 16.12 Mbps Adapter D. The AP was AG-225H. TX/RX were only 16~19Mbps E. AP is ZyXEL G-2000 or G-3000. When user is settings WPA-Psk mode,it will be happened TX throughput instability 6.SPRID 060427195: DUT site survey the 11a AP hardly in more 11g AP Environment 7.SPRID 060427197: AG-225H connected to AG-225H software AP with enable power saving mode. The performance was very worse 8.SPRID 060512770: In XP and XP64 bit OS. In AP mode. DUT bridged with Ethernet card. The Utility didn't work normally 9.SPRID 060515869: In XP 64 bits OS. The "ZDA211BU.sys" didn't remove after uninstall DUT 10.SPRID 080225828: AG-225H v2 driver name was the same with AG-220.

WLANZyXELspridAG-225HdutthroughputconnectZyXEL AG-225H WLANmodeAG-225H WLAN

This file contains a compressed (or zipped) set of files. Download the...

runfileNWD270N WLANNWD270NinstructionssetfilesWLANunzipZyXEL NWD270N WLANdoubleclickZyXEL

8. DUT works on Ad-Hoc mode, the throughput is lower than criterion. 9. In real world environment, DUT(Vista wireless utility) can’t associate to AP (WPA/WPA2/WPA-PSK/WPA2-PSK) with (P-335U v 360_AMB0_C0) sometimes and 802.1 x modes (ZyAIR G-3000H v3.50_AAH3_C0) sometimes. 10. In all OS, sometimes GUI-> Survey function works failure, survey list becomes empty. (If the neighbor AP’s SSID numbers are more than 50, this issue usually happened.) 11. In PQA_SW1 tester office (Neighbor AP more than 50), the ZyDAS ZD1212b chipset DUT (G-120/G-320H/AG-120/AG-320 driver: v1.5.4.6) connected ability is weak, many features sometimes can’t work normally. (Ex: Site survey、OTIST、WPA、WPA2…..) 12. In Vista/Vista64, utility initial time takes approximately 1.5 to 2 minute. 13. If ZyXEL P-335U works on WPA/WPA2 mode, the re-authentication timer is “600” seconds. It’s more than 3 minutes that DUT couldn’t associate to AP automatically after “re-authentication”. This issue occurs on all OS. 14. (DUT Vista driver with Microsoft Vista utility)-> After overnight stress test on WPA-PSK mode, wireless STA1 (Vista32) crash and wireless STA2 (Vista64) disconnect to AP sometimes; (DUT Vista driver with DUT utility v2.0.0b2、v.2.0.0b3、v2.0.0b4)-> After overnight stress test on WPA-PSK mode, two wireless clients FTP transmission broke off. 15. IOP: P-2602HWL-D1A wireless QoS function(by application port) isn’t noticeable sometimes if wireless clients are ZyXEL G-120/AG-120/G-320H/AG-320 (chipset: ZD1212B, driver: 1.5.4.6). (If clients are Intel 2200 or 2915 chipset, driver: 9.0.4.17, the QoS function works normally.) Notes: 1. No Refresh icon in Site Survey and Profile page.

WLANG-320H WLANvistautilitymodedutG-320H PCI WLAN AdapterwirelessG-320HcanrsquotZyXELZyXEL G-320H Wireless LANZyXEL G-320H WLAN

- Wireless Security WEP, WPA-PSK, WPA2-PSK Wi-Fi Protected Setup (WPS) hardware button, WPS software feature - WLAN Features WPS Wi-Fi Multimedia (WMM) - Hardware Specifications Interface: USB 2.0 Type A LED indicator: Link/Activity Antenna: Three internal dual-band antennas

NWD2705 Wireless LANwirelessWLANtypeZyXELwpsNWD2705 WLANZyXEL NWD2705 WLANlinkspecificationsinterfacealedghzactivityantennausbNWD2705

- Wireless Security WEP, WPA-PSK, WPA2-PSK Wi-Fi Protected Setup (WPS) hardware button, WPS software feature - WLAN Features WPS Wi-Fi Multimedia (WMM) - Hardware Specifications Interface: USB 2.0 Type A LED indicator: Link/Activity Antenna: Three internal dual-band antennas

ghzWLANwirelesswpsactivityantennaZyXEL NWD2705 WLANusbNWD2705 Wireless LANNWD2705 WLANNWD2705specificationsinterfaceZyXELtypelinkaled

1. USB3.0 driver will only support on Mac OS v10.8.3 and later version.

ZyXEL NWD6605 WirelessfailaesZyXELWLANconnectionZyXEL NWD6605 WiFiNWD6605wpanonetkipZyXEL NWD6605 WLANsecurityZyXEL NWD6605 Network

1. Go to Device Manager (right click on My Computer, choose Manage and then find Device Manager in the left panel) 2. Right click on the hardware device you wish to update and choose Update Driver Software

manuallyupdateclickZyXELsteps716WindowsWireless LANZyXEL WLAN AdapterNetwork Adapterchoose

1. Go to Device Manager (right click on My Computer, choose Manage and then find Device Manager in the left panel) 2. Right click on the hardware device you wish to update and choose Update Driver Software

ZyXEL WLAN Adapterclick928WindowschoosemanuallyWireless LANupdateZyXEL64-bitNetwork Adaptersteps

1. Go to Device Manager (right click on My Computer, choose Manage and then find Device Manager in the left panel) 2. Right click on the hardware device you wish to update and choose Update Driver Software

Network AdapterZyXELupdateZyXEL WLAN AdaptermanuallyWindowsWireless LANchoosesteps928click

1. Go to Device Manager (right click on My Computer, choose Manage and then find Device Manager in the left panel) 2. Right click on the hardware device you wish to update and choose Update Driver Software

ZyXEL WLAN AdapterWireless LANupdatemanuallyNetwork AdapterclickchoosestepsWindowsZyXEL64-bit716

1. Go to Device Manager (right click on My Computer, choose Manage and then find Device Manager in the left panel) 2. Right click on the hardware device you wish to update and choose Update Driver Software

64-bitWireless LANchooseWindowsZyXEL WLAN Adapterclickstepsmanuallyupdate1231ZyXELNetwork Adapter

1. Go to Device Manager (right click on My Computer, choose Manage and then find Device Manager in the left panel) 2. Right click on the hardware device you wish to update and choose Update Driver Software

Wireless LANupdate1231manuallyWindowschooseZyXEL WLAN AdapterclickNetwork AdapterstepsZyXEL

«« « 12 » »»