Download Zyxel drivers

«« « 123456 » »»

Provides the Zyxel MES-3728 Firmware 390BBD2C0.

Zyxel MES-3728ZyxelsetMES-3728device

Provides the Zyxel NBG-419N Firmware 1.00(BFQ.1)C0.

zYXELsetBFQZyxel NBG-419Ndeviceupdate

Provides the Zyxel NBG-460N Firmware 3.60(AMX.6)C0.

Zyxel NBG-460NsetAMXdevice

Provides the Zyxel NSA-220 Plus Firmware 3.22(AFG.0)C0.

devicesetZyxel NSA-220 PlusAFGNSA-220 Plus

Provides the Zyxel P-2602HWL-D1A Firmware 3.70(ADQ.7)C0.

Zyxel P-2602HWL-D1AsetP-2602HWL-D1AADQdevice

Provides the Zyxel P-660HW-D3 Firmware 3.40(AGM.5)C0.

Zyxel P-660HW-D3setP-660HW-D3AGMdevice

Provides the Zyxel V500-T1 Firmware 1.10(AOX.0)C0.

V500-T1AOXdeviceZyxel V500-T1installingsystem

Provides the Zyxel V501-T1 Firmware 1.10(AOX.0)C0.

AOXV501-T1deviceinstallingZyxelsystemZyxel V501-T1

Provides the Zyxel ZyWALL 2 Plus Firmware 4.04(XU.8)C0.

Zyxel ZyWALL PlusZyxelZyWALL Plusdeviceset

Provides the Zyxel ZyWALL 35 Firmware 4.04(WZ.6)C0.

setZyWALLdeviceZyxel ZyWALL

Provides the Zyxel ZyWALL 35 UTM Firmware 4.04(WZ.6)C0.

ZyWALL UTMZyxel ZyWALL UTMdeviceset

Provides the Zyxel ZyWALL 5 Firmware 4.04(XD.6)C0.

setZyxel ZyWALLdevice

Provides the Zyxel ZyWALL 5 UTM Firmware 4.04(XD.6)C0.

ZyWALL UTMZyxelsetZyWALLdeviceZyxel ZyWALL UTM

Provides the Zyxel ZyWALL SSL 10 Firmware 2.00(AQH.1)C0.

Zyxel ZyWALL SSLAQHZyWALL SSLsetdevice

- Content Filter will pop out error message. "System internal error. Invalid service" - L2TP can not build after device reboot. - USG-1000 / L2TP User Auth will fail after 2 Weeks - USG-300 / ZySH Daemon Issue, VPN can't build up and DSL disconnect Issue since Patch 4 Weekly - pro daemon dead after SSLVPN-Dial-in fail with FQDN - After using IPSec/SSL VPN for a long time, the throughput drop and finally no more traffic can be encrypted/decrypted. - USG-1000 / 400 L2TP VPN’s after upgrade to v3.00 cause issue - Downloading large amount of emails outlook email dump fail - USG-1000 / 400 L2TP VPN’s after upgrade to v3.00 cause issue - LAN1 will stop distributing IP once LAN2 is changed to DHCP Relay

ZyWALL USG 200 GatewayltpZyXELfailusgZyXEL ZyWALL USG 200AQUvpnZyWALL USG 200

This package contains the files for installing the ZyXEL ZyWALL 1100 VPN...

addexpandproblemsfunctionsprogramAAACindependentZyXELlanguageZyWALL 1100 FirewallZyWALL 1100 VPN FirewallZyWALL 1100

This package contains the files for installing the ZyXEL ZyWALL 310 VPN...

languageindependentaddZyWALL 310 FirewallfunctionsproblemsexpandZyWALL 310 VPN FirewallZyXELZyWALL 310ZyXEL ZyWALL 310 FirewallprogramAAAB

This package contains the files for installing the ZyXEL NWA5123-NI...

problemsNWA5123-NI Access PointindependentZyXEL NWA5123-NIexpandNWA5123-NIfunctionslanguageprogramZyXELAAIFadd

- Syslog - IGMP filtering - MVR - Administration user management - Multiple RADIUS server - Multiple TACACS+ servers - MRSTP - Protocol-based VLAN - 802.1s MSTP - 802.3ah OAM

XS3900-48F 48-port SwitchigmpvlanXS3900-48F 10GbE SwitchsnoopingsupportmacZyXELmultipleradiusXS3900-48Fcfm

- Some specific certificate could cause hard to access device via HTTPS.

ZyWALL 110ZyWALL 110 FirewallZyXELhttpsAAAAaccessZyWALL 110 VPN FirewallspecificcertificateZyXEL ZyWALL 110 Firewall

This package contains the files for installing the ZyXEL NWA5121-NI...

ZyXELZyXEL NWA5121-NINWA5121-NI Access PointprogramexpandindependentNWA5121-NIproblemsAAIDfunctionslanguageadd

- WPA/WPA2-enterprise, supports EAP-MD5/ TLS/TTLS - 32 MAC filter - Wireless scheduling - High gain power option for specific regions High Availability WAN: - Three WAN interface (VDSL, Ethernet and mobile USB) options - User configurable multi-WAN load balancing with one WAN for failover/fallback Bridge/Router: - Dynamic learning for up to 2014 MAC address - PPPoE, PPPoA, IPoE, IPoA (RFC 1483)

ipsecZyXEL SBG3300-NB00ssidAAIWZyXELvdslannexSBG3300-NB00adslsupports

- MAC OS can't use storage's admin account to connect AFP data service - [Enclosure] Buzzer is no working when system is on abnormal status - UPS detection does not work properly - [ZFS] We can edit zfs size over pool free size. - [WHQL Logo] WHQL test failed with UNS2700

UNS2700ZyXEL UNS2700 StorageUNS2700 Network StorageservicedatasizedisconnectedZyXELaccount

- Auto channel selection - Wireless scheduling - Wireless output power management Routing: - Network Address Translation (NAT) - WAN connection type: static IP, DHCP, PPPoE, PPTP - DHCP server/client - IGMP v1/v2 - Dynamic DNS - Bandwidth management

ipsecwirelesswpadhcpNBG6503 Wireless RouterAAJNpptpmanagementNBG6503 Dual-Band RouterNBG6503 AC750 RouterZyXELmbpswifighzZyXEL NBG6503 RouterNBG6503

- The version of API used in Dropbox feature is migrated to version 1, due to old version doesn’t work with the new accounts of Dropbox - Increase the number of processes from 5 to 10 which are shown to indicate the CPU usage. - Adjust the position of link of FW Upgrade/Package management page. - Upgrade Twonky to 7.0.13

ZyXELmagnetNSA320 2-Bay Media ServerNSA320 Media ServermanagementNSA320 Power Media ServerlinkupgradeAFOversiondropboxZyXEL NSA320 Media ServersupportNSA320

- [IPv6] In web page, user can modify and delete the global address ruler. But, user only can modify the link-local address ruler. - [Radius] When radius server only exists in server 2, device will send ”Radius server 1 is unreachable” syslog. But, when radius server exists in server 1, device could not send ”server 1 is reachable” syslog. - [CFM] After send LBM packets into device, device could not response with LBR. (it may be cc message timeout). It only occurs in 48 port device, not occurs in 24 port device. - [Clone] When port copy running-config need long time. And destination port link down/link up when cloning. - [IPv6] Ping the non-existent ipv6 host, device will send 9 ns packets and 3 request time out. But, CLI will diplay ”transmit 3 packets,...”. - [IPv6] After modify ns interval to 10 seconds, and ping the non-existent ipv6 host, it should send 9 ns packets, not 3 ns packets. - [ARP] Use SMB to simulate 128 host, device ping the simulated host via trunk interface, ping will time out. After unplug and plug-in the cable, ping will be ok. - [CFM] In spanning tree topology, execute linktrace from device 3 to device 1 (eth cfm link re 7003 mep 1003 ma 3 md 1), the ”chassis-id” field should be N/A, not empty or scramble (eth cfm link re 7003 mep 1003 ma 3 md 1). - [CFM] In spanning topology, execute linktrace from device 3 into device 4 (eth cfm link re 7001 mep 1001 ma 7 md 3), linktrace will be fail. After modify mep 7001 direction from down to up , it will be ok. The root cuase may be spanning blocking port. It seems that spanning blocking port will effect mep direction setting. - [MAC-Pinning] When enable mac pinning+trunking ports already learned {MAC A, VLAN A}, then the other ports (disable mac pinning) shouldn’t learn {MAC A, VLAN A}

AAGDZyXELGS3700-24HP GbE SwitchZyXEL GS3700-24HP SwitchSwitchGS3700-24HPipvserver

- [IPv6] In web page, user can modify and delete the global address ruler. But, user only can modify the link-local address ruler. - [Radius] When radius server only exists in server 2, device will send ”Radius server 1 is unreachable” syslog. But, when radius server exists in server 1, device could not send ”server 1 is reachable” syslog. - [CFM] After send LBM packets into device, device could not response with LBR. (it may be cc message timeout). It only occurs in 48 port device, not occurs in 24 port device. - [Clone] When port copy running-config need long time. And destination port link down/link up when cloning. - [IPv6] Ping the non-existent ipv6 host, device will send 9 ns packets and 3 request time out. But, CLI will diplay ”transmit 3 packets,...”. - [IPv6] After modify ns interval to 10 seconds, and ping the non-existent ipv6 host, it should send 9 ns packets, not 3 ns packets. - [ARP] Use SMB to simulate 128 host, device ping the simulated host via trunk interface, ping will time out. After unplug and plug-in the cable, ping will be ok. - [CFM] In spanning tree topology, execute linktrace from device 3 to device 1 (eth cfm link re 7003 mep 1003 ma 3 md 1), the ”chassis-id” field should be N/A, not empty or scramble (eth cfm link re 7003 mep 1003 ma 3 md 1). - [CFM] In spanning topology, execute linktrace from device 3 into device 4 (eth cfm link re 7001 mep 1001 ma 7 md 3), linktrace will be fail. After modify mep 7001 direction from down to up , it will be ok. The root cuase may be spanning blocking port. It seems that spanning blocking port will effect mep direction setting. - [MAC-Pinning] When enable mac pinning+trunking ports already learned {MAC A, VLAN A}, then the other ports (disable mac pinning) shouldn’t learn {MAC A, VLAN A}

ZyXEL XGS3700-48 SwitchipvZyXELXGS3700-48 48-port SwitchXGS3700-48 GbE SwitchSwitchXGS3700-48AAGEserver

«« « 123456 » »»