Download Zyxel drivers 2nd

«« « 123456 » »»

- MAC OS can't use storage's admin account to connect AFP data service - [Enclosure] Buzzer is no working when system is on abnormal status - UPS detection does not work properly - [ZFS] We can edit zfs size over pool free size. - [WHQL Logo] WHQL test failed with UNS2700

UNS2700ZyXEL UNS2700 StorageUNS2700 Network StorageservicedatasizedisconnectedZyXELaccount

- Auto channel selection - Wireless scheduling - Wireless output power management Routing: - Network Address Translation (NAT) - WAN connection type: static IP, DHCP, PPPoE, PPTP - DHCP server/client - IGMP v1/v2 - Dynamic DNS - Bandwidth management

ipsecwirelesswpadhcpNBG6503 Wireless RouterAAJNpptpmanagementNBG6503 Dual-Band RouterNBG6503 AC750 RouterZyXELmbpswifighzZyXEL NBG6503 RouterNBG6503

- The version of API used in Dropbox feature is migrated to version 1, due to old version doesn’t work with the new accounts of Dropbox - Increase the number of processes from 5 to 10 which are shown to indicate the CPU usage. - Adjust the position of link of FW Upgrade/Package management page. - Upgrade Twonky to 7.0.13

ZyXELmagnetNSA320 2-Bay Media ServerNSA320 Media ServermanagementNSA320 Power Media ServerlinkupgradeAFOversiondropboxZyXEL NSA320 Media ServersupportNSA320

- [IPv6] In web page, user can modify and delete the global address ruler. But, user only can modify the link-local address ruler. - [Radius] When radius server only exists in server 2, device will send ”Radius server 1 is unreachable” syslog. But, when radius server exists in server 1, device could not send ”server 1 is reachable” syslog. - [CFM] After send LBM packets into device, device could not response with LBR. (it may be cc message timeout). It only occurs in 48 port device, not occurs in 24 port device. - [Clone] When port copy running-config need long time. And destination port link down/link up when cloning. - [IPv6] Ping the non-existent ipv6 host, device will send 9 ns packets and 3 request time out. But, CLI will diplay ”transmit 3 packets,...”. - [IPv6] After modify ns interval to 10 seconds, and ping the non-existent ipv6 host, it should send 9 ns packets, not 3 ns packets. - [ARP] Use SMB to simulate 128 host, device ping the simulated host via trunk interface, ping will time out. After unplug and plug-in the cable, ping will be ok. - [CFM] In spanning tree topology, execute linktrace from device 3 to device 1 (eth cfm link re 7003 mep 1003 ma 3 md 1), the ”chassis-id” field should be N/A, not empty or scramble (eth cfm link re 7003 mep 1003 ma 3 md 1). - [CFM] In spanning topology, execute linktrace from device 3 into device 4 (eth cfm link re 7001 mep 1001 ma 7 md 3), linktrace will be fail. After modify mep 7001 direction from down to up , it will be ok. The root cuase may be spanning blocking port. It seems that spanning blocking port will effect mep direction setting. - [MAC-Pinning] When enable mac pinning+trunking ports already learned {MAC A, VLAN A}, then the other ports (disable mac pinning) shouldn’t learn {MAC A, VLAN A}

AAGDZyXELGS3700-24HP GbE SwitchZyXEL GS3700-24HP SwitchSwitchGS3700-24HPipvserver

- [IPv6] In web page, user can modify and delete the global address ruler. But, user only can modify the link-local address ruler. - [Radius] When radius server only exists in server 2, device will send ”Radius server 1 is unreachable” syslog. But, when radius server exists in server 1, device could not send ”server 1 is reachable” syslog. - [CFM] After send LBM packets into device, device could not response with LBR. (it may be cc message timeout). It only occurs in 48 port device, not occurs in 24 port device. - [Clone] When port copy running-config need long time. And destination port link down/link up when cloning. - [IPv6] Ping the non-existent ipv6 host, device will send 9 ns packets and 3 request time out. But, CLI will diplay ”transmit 3 packets,...”. - [IPv6] After modify ns interval to 10 seconds, and ping the non-existent ipv6 host, it should send 9 ns packets, not 3 ns packets. - [ARP] Use SMB to simulate 128 host, device ping the simulated host via trunk interface, ping will time out. After unplug and plug-in the cable, ping will be ok. - [CFM] In spanning tree topology, execute linktrace from device 3 to device 1 (eth cfm link re 7003 mep 1003 ma 3 md 1), the ”chassis-id” field should be N/A, not empty or scramble (eth cfm link re 7003 mep 1003 ma 3 md 1). - [CFM] In spanning topology, execute linktrace from device 3 into device 4 (eth cfm link re 7001 mep 1001 ma 7 md 3), linktrace will be fail. After modify mep 7001 direction from down to up , it will be ok. The root cuase may be spanning blocking port. It seems that spanning blocking port will effect mep direction setting. - [MAC-Pinning] When enable mac pinning+trunking ports already learned {MAC A, VLAN A}, then the other ports (disable mac pinning) shouldn’t learn {MAC A, VLAN A}

ZyXEL XGS3700-48 SwitchipvZyXELXGS3700-48 48-port SwitchXGS3700-48 GbE SwitchSwitchXGS3700-48AAGEserver

- eITS # 13010274: The 2.4G band More AP function can't work - eITS # 130102984: NAT/Port forwarding is not configurable in French - Gray out 5GHz DFS checkbox, the default parameter is Enable

configurationNBG5715 RoutereitsissueAAAGZyXELadjustNBG5715workparameterbuttonNBG5715 Dual-Band RouterzoneNBG5715 Wireless RouterZyXEL NBG5715 Router

- [IPv6] In web page, user can modify and delete the global address ruler. But, user only can modify the link-local address ruler. - [Radius] When radius server only exists in server 2, device will send ”Radius server 1 is unreachable” syslog. But, when radius server exists in server 1, device could not send ”server 1 is reachable” syslog. - [CFM] After send LBM packets into device, device could not response with LBR. (it may be cc message timeout). It only occurs in 48 port device, not occurs in 24 port device. - [Clone] When port copy running-config need long time. And destination port link down/link up when cloning. - [IPv6] Ping the non-existent ipv6 host, device will send 9 ns packets and 3 request time out. But, CLI will diplay ”transmit 3 packets,...”. - [IPv6] After modify ns interval to 10 seconds, and ping the non-existent ipv6 host, it should send 9 ns packets, not 3 ns packets. - [ARP] Use SMB to simulate 128 host, device ping the simulated host via trunk interface, ping will time out. After unplug and plug-in the cable, ping will be ok. - [CFM] In spanning tree topology, execute linktrace from device 3 to device 1 (eth cfm link re 7003 mep 1003 ma 3 md 1), the ”chassis-id” field should be N/A, not empty or scramble (eth cfm link re 7003 mep 1003 ma 3 md 1). - [CFM] In spanning topology, execute linktrace from device 3 into device 4 (eth cfm link re 7001 mep 1001 ma 7 md 3), linktrace will be fail. After modify mep 7001 direction from down to up , it will be ok. The root cuase may be spanning blocking port. It seems that spanning blocking port will effect mep direction setting. - [MAC-Pinning] When enable mac pinning+trunking ports already learned {MAC A, VLAN A}, then the other ports (disable mac pinning) shouldn’t learn {MAC A, VLAN A}

GS3700-48HP SwitchserverSwitchZyXEL GS3700-48HP SwitchGS3700-48HPipvAAGBZyXELGS3700-48HP GbE

- [IPv6] In web page, user can modify and delete the global address ruler. But, user only can modify the link-local address ruler. - [Radius] When radius server only exists in server 2, device will send ”Radius server 1 is unreachable” syslog. But, when radius server exists in server 1, device could not send ”server 1 is reachable” syslog. - [CFM] After send LBM packets into device, device could not response with LBR. (it may be cc message timeout). It only occurs in 48 port device, not occurs in 24 port device. - [Clone] When port copy running-config need long time. And destination port link down/link up when cloning. - [IPv6] Ping the non-existent ipv6 host, device will send 9 ns packets and 3 request time out. But, CLI will diplay ”transmit 3 packets,...”. - [IPv6] After modify ns interval to 10 seconds, and ping the non-existent ipv6 host, it should send 9 ns packets, not 3 ns packets. - [ARP] Use SMB to simulate 128 host, device ping the simulated host via trunk interface, ping will time out. After unplug and plug-in the cable, ping will be ok. - [CFM] In spanning tree topology, execute linktrace from device 3 to device 1 (eth cfm link re 7003 mep 1003 ma 3 md 1), the ”chassis-id” field should be N/A, not empty or scramble (eth cfm link re 7003 mep 1003 ma 3 md 1). - [CFM] In spanning topology, execute linktrace from device 3 into device 4 (eth cfm link re 7001 mep 1001 ma 7 md 3), linktrace will be fail. After modify mep 7001 direction from down to up , it will be ok. The root cuase may be spanning blocking port. It seems that spanning blocking port will effect mep direction setting. - [MAC-Pinning] When enable mac pinning+trunking ports already learned {MAC A, VLAN A}, then the other ports (disable mac pinning) shouldn’t learn {MAC A, VLAN A}

GS3700-24 GbE SwitchipvserverAAFYZyXEL GS3700-24 SwitchGS3700-24ZyXELGS3700-24 24-port SwitchSwitch

- [IPv6] In web page, user can modify and delete the global address ruler. But, user only can modify the link-local address ruler. - [Radius] When radius server only exists in server 2, device will send ”Radius server 1 is unreachable” syslog. But, when radius server exists in server 1, device could not send ”server 1 is reachable” syslog. - [CFM] After send LBM packets into device, device could not response with LBR. (it may be cc message timeout). It only occurs in 48 port device, not occurs in 24 port device. - [Clone] When port copy running-config need long time. And destination port link down/link up when cloning. - [IPv6] Ping the non-existent ipv6 host, device will send 9 ns packets and 3 request time out. But, CLI will diplay ”transmit 3 packets,...”. - [IPv6] After modify ns interval to 10 seconds, and ping the non-existent ipv6 host, it should send 9 ns packets, not 3 ns packets. - [ARP] Use SMB to simulate 128 host, device ping the simulated host via trunk interface, ping will time out. After unplug and plug-in the cable, ping will be ok. - [CFM] In spanning tree topology, execute linktrace from device 3 to device 1 (eth cfm link re 7003 mep 1003 ma 3 md 1), the ”chassis-id” field should be N/A, not empty or scramble (eth cfm link re 7003 mep 1003 ma 3 md 1). - [CFM] In spanning topology, execute linktrace from device 3 into device 4 (eth cfm link re 7001 mep 1001 ma 7 md 3), linktrace will be fail. After modify mep 7001 direction from down to up , it will be ok. The root cuase may be spanning blocking port. It seems that spanning blocking port will effect mep direction setting. - [MAC-Pinning] When enable mac pinning+trunking ports already learned {MAC A, VLAN A}, then the other ports (disable mac pinning) shouldn’t learn {MAC A, VLAN A}

AAGCSwitchXGS3700-24 GbE SwitchXGS3700-24ZyXELserveripvZyXEL XGS3700-24 SwitchXGS3700-24 24-port Switch

- The version of API used in Dropbox feature is migrated to version 1, due to old version doesn’t work with the new accounts of Dropbox - Increase the number of processes from 5 to 10 which are shown to indicate the CPU usage. - Adjust the position of link of FW Upgrade/Package management page. - Upgrade Twonky to 7.0.13

linkdropboxversionupgradeNSA325 Power Media ServerAAAJNSA325 Media ServerZyXEL NSA325 Media ServerNSA325 2-Bay Media ServermagnetNSA325ZyXELmanagementsupport

- [IPv6] In web page, user can modify and delete the global address ruler. But, user only can modify the link-local address ruler. - [Radius] When radius server only exists in server 2, device will send ”Radius server 1 is unreachable” syslog. But, when radius server exists in server 1, device could not send ”server 1 is reachable” syslog. - [CFM] After send LBM packets into device, device could not response with LBR. (it may be cc message timeout). It only occurs in 48 port device, not occurs in 24 port device. - [Clone] When port copy running-config need long time. And destination port link down/link up when cloning. - [IPv6] Ping the non-existent ipv6 host, device will send 9 ns packets and 3 request time out. But, CLI will diplay ”transmit 3 packets,...”. - [IPv6] After modify ns interval to 10 seconds, and ping the non-existent ipv6 host, it should send 9 ns packets, not 3 ns packets. - [ARP] Use SMB to simulate 128 host, device ping the simulated host via trunk interface, ping will time out. After unplug and plug-in the cable, ping will be ok. - [CFM] In spanning tree topology, execute linktrace from device 3 to device 1 (eth cfm link re 7003 mep 1003 ma 3 md 1), the ”chassis-id” field should be N/A, not empty or scramble (eth cfm link re 7003 mep 1003 ma 3 md 1). - [CFM] In spanning topology, execute linktrace from device 3 into device 4 (eth cfm link re 7001 mep 1001 ma 7 md 3), linktrace will be fail. After modify mep 7001 direction from down to up , it will be ok. The root cuase may be spanning blocking port. It seems that spanning blocking port will effect mep direction setting. - [MAC-Pinning] When enable mac pinning+trunking ports already learned {MAC A, VLAN A}, then the other ports (disable mac pinning) shouldn’t learn {MAC A, VLAN A}

ZyXELserverAAGASwitchGS3700-48 GbEGS3700-48 48-port SwitchZyXEL GS3700-48 SwitchGS3700-48 SwitchGS3700-48ipv

- [IPv6] In web page, user can modify and delete the global address ruler. But, user only can modify the link-local address ruler. - [Radius] When radius server only exists in server 2, device will send ”Radius server 1 is unreachable” syslog. But, when radius server exists in server 1, device could not send ”server 1 is reachable” syslog. - [CFM] After send LBM packets into device, device could not response with LBR. (it may be cc message timeout). It only occurs in 48 port device, not occurs in 24 port device. - [Clone] When port copy running-config need long time. And destination port link down/link up when cloning. - [IPv6] Ping the non-existent ipv6 host, device will send 9 ns packets and 3 request time out. But, CLI will diplay ”transmit 3 packets,...”. - [IPv6] After modify ns interval to 10 seconds, and ping the non-existent ipv6 host, it should send 9 ns packets, not 3 ns packets. - [ARP] Use SMB to simulate 128 host, device ping the simulated host via trunk interface, ping will time out. After unplug and plug-in the cable, ping will be ok. - [CFM] In spanning tree topology, execute linktrace from device 3 to device 1 (eth cfm link re 7003 mep 1003 ma 3 md 1), the ”chassis-id” field should be N/A, not empty or scramble (eth cfm link re 7003 mep 1003 ma 3 md 1). - [CFM] In spanning topology, execute linktrace from device 3 into device 4 (eth cfm link re 7001 mep 1001 ma 7 md 3), linktrace will be fail. After modify mep 7001 direction from down to up , it will be ok. The root cuase may be spanning blocking port. It seems that spanning blocking port will effect mep direction setting. - [MAC-Pinning] When enable mac pinning+trunking ports already learned {MAC A, VLAN A}, then the other ports (disable mac pinning) shouldn’t learn {MAC A, VLAN A}

XGS3700-24SwitchZyXELXGS3700-48HP GbE SwitchZyXEL XGS3700-48HP SwitchAAGFipvserverXGS3700-48HP

- USG-1000 / L2TP User Auth will fail after 2 Weeks - USG-300 / ZySH Daemon Issue, VPN can't build up and DSL disconnect Issue since Patch 4 Weekly - Pro daemon dead after SSLVPN-Dial-in fail with FQDN - After using IPSec/SSL VPN for a long time, the throughput drop and finally no more traffic can be encrypted/decrypted. - USG-1000 / 400 L2TP VPN’s after upgrade to v3.00 cause issue - Downloading large amount of emails outlook email dump fail - USG-1000 / 400 L2TP VPN’s after upgrade to v3.00 cause issue - LAN1 will stop distributing IP once LAN2 is changed to DHCP Relay - USG1000 - Reboots automatically two times per day. - L2TP TCP MSS adjustment does not work.

ZyXEL USG100-PLUS GatewayZyXELvpnUSG100-PLUSltpusgAACV

- IS-IS packets will be dropped. - DUT will crash when use SNMP to access tcpConnState (OID = 1.3.6.1.2.1.6.13.1.1) with incorrect length key. - When set VLAN members via SNMP without all members port-bit-map, VLAN members setting will be abnormal. - Allow NULL source MAC address 00:00:00:00:00:00 in MAC filter and classifier.

GS2200-8HP SwitchsnoopingZyXEL GS2200-8HP SwitchdutZyXELmembersmacGS2200-8HP GbE SwitchaddressGS2200-8HPAAAWdhcp

This package contains the files for installing the ZyXEL MAX218M1W...

expandMAX218M1W Indoor GatewayindependentaddfunctionsZyXELMAX218M1W Wi-Fi GatewayMAX218M1WUXEprogramZyXEL MAX218M1W GatewayproblemsMAX218M1W WiMAX Gatewaylanguage

- SIP over TCP for smart phone - Debug CLI to monitor extension activity

ZyXEL ISG50-ISDN GatewaypeerZyXELcallAAADtrustedISG50-ISDNISG50-ISDN Gatewayconnects

- Media Server: support id3 tag by libiconv - Online firmware upgrade stopped unexpectedly

largeNSA-220 PlusZyXEL NSA-220 PlussendingserversolveNSA-220 Plus NASsupportZyXELsmbdAFGZyXEL NSA-220 Plus NASfilesfix

This package contains the files for installing the ZyXEL MAX218MW Gateway...

ZyXELMAX218MW Indoor GatewayZyXEL MAX218MW GatewayMAX218MW WiMAX GatewayMAX218MW Wi-Fi GatewayfunctionsindependentexpandMAX218MWaddproblemslanguageUXDprogram

This package contains the files for installing the ZyXEL MAX218M Gateway...

independentproblemsaddexpandlanguageMAX218MMAX218M WiMAX GatewayMAX218M Indoor GatewayprogramZyXELfunctionsMAX218M Wi-Fi GatewayZyXEL MAX218M GatewayUXG

- Update filename from V1.00 (ZY.8)b1 to V1.00 (ZY.8) C0

zybVSG-1200 Service GatewayVSG-1200 Hotspot GatewayupdateZyXELfixesZyXEL VSG-1200 GatewayVSG-1200 GatewayVSG-1200filename

- Modification Firmware version from (ZL.8)b1 to (ZL.8) C0

ZyXEL G-4100 Access PointG-4100G-4100 Access PointzlbZyXEL G-4100ZyXELfixesversionG-4100 Wirelessmodification

This package contains the files for installing the ZyXEL MAX318M Gateway...

languageMAX318M WiMAX GatewayMAX318M Outdoor GatewayMAX318M Wi-Fi GatewayproblemsexpandindependentZyXEL MAX318M GatewayUUAaddZyXELfunctionsprogramMAX318M

- Change to FCS version V1.00(AAJM.0)C0

vaajmcfixesEMG2306-R10AfcsversionAAJMZyXEL

- Add Korea language - UR and Client Bridge can detect hidden SSID and display it in site survey list - WAP2 personal and Enterprise security will only support AES encryption only

hostNBG-418N Wireless RouterAADZeitsNBG-418NNBG-418N RouterZyXEL NBG-418N RouteradddhcpfunctionNBG-418N Home RouterwrongZyXEL

«« « 123456 » »»