Download YAMAHA drivers

«« « 12 » »»

- When a Preset is recalled, you can set the Scheduler function to be disabled in the "Preset" dialog box. - Added display of the serial number for devices, and battery power status (for a device that contains batteries) in the "Device Information" dialog box. - By using the switches of the DCP1V4S-US/EU, it is possible to change the control assignment of the knob, letting you use the knob for two or more functions such as Source Select. - Added the function of word clock setup. - Added an emergency mode: A preset can be assigned as an emergency mode, to be triggered by GPI. This can be utilized for muting a sound system in the case of emergency, such as the outbreak of a fire, etc. - Added VXC series and VXS series to the library for the SPEAKER PROCESSOR. Improvements: - Improved the functions of SD Song Select & Play. - The initial saved Project file destination was changed to My Documents. Previously this was set to either C:\Program Files or C:\Program Files (x86). Fixed Bugs:

dialogxmvdMTX5-DMTX5-D Matrix ProcessorMTX EditorYamaha MTX5-D DanteeditorxmvaddedYamaha MTX Editor UtilityWindowsmtx

- Added display of the serial number for devices, and battery power status (for a device that contains batteries) in the "Device Information" dialog box. - By using the switches of the DCP1V4S-US/EU, it is possible to change the control assignment of the knob, letting you use the knob for two or more functions such as Source Select. - Added the function of word clock setup. - Added an emergency mode: A preset can be assigned as an emergency mode, to be triggered by GPI. This can be utilized for muting a sound system in the case of emergency, such as the outbreak of a fire, etc. - Added VXC series and VXS series to the library for the SPEAKER PROCESSOR. Improvements: - Improved the functions of SD Song Select & Play. - The initial saved Project file destination was changed to My Documents. Previously this was set to either C:\Program Files or C:\Program Files (x86). Fixed Bugs: - Solved a problem when settings are taken into MTX Editor using the "Go Online From Devices" dialog box from the MTX system (of two or more MTX units) in the state where GPI Out is set up in the "Scheduler" dialog, the GPI Out settings of the second and subsequent MTX3 units will be incorrectly displayed.

MTX3 DantemtxMTX3editorxmvYamaha MTX Editor UtilityMTX3 Matrix ProcessordialogaddedWindowsMTX Editor

- When a Preset is recalled, you can set the Scheduler function to be disabled in the "Preset" dialog box. - Added display of the serial number for devices, and battery power status (for a device that contains batteries) in the "Device Information" dialog box. - By using the switches of the DCP1V4S-US/EU, it is possible to change the control assignment of the knob, letting you use the knob for two or more functions such as Source Select. - Added the function of word clock setup. - Added an emergency mode: A preset can be assigned as an emergency mode, to be triggered by GPI. This can be utilized for muting a sound system in the case of emergency, such as the outbreak of a fire, etc. - Added VXC series and VXS series to the library for the SPEAKER PROCESSOR. Improvements: - Improved the functions of SD Song Select & Play. - The initial saved Project file destination was changed to My Documents. Previously this was set to either C:\Program Files or C:\Program Files (x86). Fixed Bugs:

XMV Matrix ProcessorYamaha MTX Editor UtilityxmvdWindowsdialogYamaha XMV DanteYamaha XMV Editor UtilityxmvsetmtxMTX EditorXMVadded

- When a Preset is recalled, you can set the Scheduler function to be disabled in the "Preset" dialog box. - Added display of the serial number for devices, and battery power status (for a device that contains batteries) in the "Device Information" dialog box. - By using the switches of the DCP1V4S-US/EU, it is possible to change the control assignment of the knob, letting you use the knob for two or more functions such as Source Select. - Added the function of word clock setup. - Added an emergency mode: A preset can be assigned as an emergency mode, to be triggered by GPI. This can be utilized for muting a sound system in the case of emergency, such as the outbreak of a fire, etc. - Added VXC series and VXS series to the library for the SPEAKER PROCESSOR. Improvements: - Improved the functions of SD Song Select & Play. - The initial saved Project file destination was changed to My Documents. Previously this was set to either C:\Program Files or C:\Program Files (x86). Fixed Bugs:

Yamaha MTX Editor UtilitysetaddedEXi8exoxmvxmvdEXo8Yamaha EXo8 DanteYamaha EXi8Windowsmtx

Improvements: - When a USB device becomes disconnected because of excessive USB current, the device can now be reconnected without having to restart the CL series (click for details). - Improved a problem in which, depending on the connected devices (a condenser microphone or a direct box), a noise was caused when adjusting their input gain from CL series with +48V enabled, at the point (between +17 dB and +18 dB) where the PAD inside HA is switched on or off. - Improved the response time of HA for SCENE RECALL, etc. Fixed bugs:

seriessolvedRio1608-DYamaha Ri8-DproblemRi8-DYamahaRi8-D RACK

Improvements: - When a USB device becomes disconnected because of excessive USB current, the device can now be reconnected without having to restart the CL series (click for details). - Improved a problem in which, depending on the connected devices (a condenser microphone or a direct box), a noise was caused when adjusting their input gain from CL series with +48V enabled, at the point (between +17 dB and +18 dB) where the PAD inside HA is switched on or off. - Improved the response time of HA for SCENE RECALL, etc. Fixed bugs:

CL3 Digital MixerYamaha CL3 Digital MixerYamaha CL3solvedYamahaproblemCL3series

Improvements: - When a USB device becomes disconnected because of excessive USB current, the device can now be reconnected without having to restart the CL series (click for details). - Improved a problem in which, depending on the connected devices (a condenser microphone or a direct box), a noise was caused when adjusting their input gain from CL series with +48V enabled, at the point (between +17 dB and +18 dB) where the PAD inside HA is switched on or off. - Improved the response time of HA for SCENE RECALL, etc. Fixed bugs:

Rio3224-DRio3224-D RACKseriesYamaha Rio3224-DYamahasolvedproblem

Improvements: - When a USB device becomes disconnected because of excessive USB current, the device can now be reconnected without having to restart the CL series (click for details). - Improved a problem in which, depending on the connected devices (a condenser microphone or a direct box), a noise was caused when adjusting their input gain from CL series with +48V enabled, at the point (between +17 dB and +18 dB) where the PAD inside HA is switched on or off. - Improved the response time of HA for SCENE RECALL, etc. Fixed bugs:

YamahaYamaha CL5solvedproblemCL5CL5 Digital MixerYamaha CL5 Digital Mixerseries

Improvements: - When a USB device becomes disconnected because of excessive USB current, the device can now be reconnected without having to restart the CL series (click for details). - Improved a problem in which, depending on the connected devices (a condenser microphone or a direct box), a noise was caused when adjusting their input gain from CL series with +48V enabled, at the point (between +17 dB and +18 dB) where the PAD inside HA is switched on or off. - Improved the response time of HA for SCENE RECALL, etc. Fixed bugs:

Yamaha CL1 Digital MixerYamaha CL1seriesCL1 Digital MixerproblemsolvedCL1Yamaha

Improvements: - When a USB device becomes disconnected because of excessive USB current, the device can now be reconnected without having to restart the CL series (click for details). - Improved a problem in which, depending on the connected devices (a condenser microphone or a direct box), a noise was caused when adjusting their input gain from CL series with +48V enabled, at the point (between +17 dB and +18 dB) where the PAD inside HA is switched on or off. - Improved the response time of HA for SCENE RECALL, etc. Fixed bugs:

Ro8-D RACKRo8-DYamahaproblemRio1608-DseriesYamaha Ro8-Dsolved

Improvements: - When a USB device becomes disconnected because of excessive USB current, the device can now be reconnected without having to restart the CL series (click for details). - Improved a problem in which, depending on the connected devices (a condenser microphone or a direct box), a noise was caused when adjusting their input gain from CL series with +48V enabled, at the point (between +17 dB and +18 dB) where the PAD inside HA is switched on or off. - Improved the response time of HA for SCENE RECALL, etc. Fixed bugs:

problemYamaha Rio1608-DYamahasolvedseriesRio1608-DRio1608-D RACK

Fixes: - HA Remote communication issues could occur on Yamaha LS9 consoles with installed Dante-MY16-AUD cards set to HA Remote modes "All" or "Slot – DB9". - Dante-MY16-AUD cards in Yamaha CL consoles would sometimes fail to lock with an external Word Clock.

cardsconsolesMini-YGDAI CarddantemyaudconfigfailDante-MY16-AUD

- The unit can now relay information about elapsed recording time and remaining recording time to the MGP Editor app.

resettingMGP32XrecordingMGP24XuserpresetmemoryMGP24X MixeruserYamaha MGP32X MixerYamaha MGP32Xprograms

- Solved a problem in which MIDI NRPN control commands could not be received.

highreceivingtransmittingsignalsYamaha 01V96i MixersamplingproblemsolvedMixerkhz01V96i Mixing Console01V96i01V96i Mixer

- Solved a problem in which the Select Track pop-up window of the DAW A may have been displayed when DAW B or DAW C was operated by using NUMERIC PAD.

displayeddawpadDAW Control SurfaceNuage Fadernumeric

- Now supports Dante Redundancy. (The secondary port became available.)

Dante AcceleratorAudio Interfaceenableacceleratorproperlydantepullwork

Fixed Bugs - Solved a problem in which an instantaneously noise would occur when, after turning on the power of Nuage I/O, the “Active” indications in the Workgroup would come on for the first time.

Sound InterfaceNuagenuageAudio InterfaceworkgroupYamaha Nuagesolvedldquoactiverdquopowerindications

- Solved a problem in which the Select Track pop-up window of the DAW A may have been displayed when DAW B or DAW C was operated by using NUMERIC PAD.

Nuage MasterDAW Control Surfacepadnumericdawdisplayed

- Fixed a problem in which the backup battery voltage may be accidently indicated as "LOW," when there is actually sufficient battery power as indicated in the Voltage field of the MISC SETUP screen.

LS9LS9 Digital MixerfixedproblemsettingYamaha LS9 Digital MixerstereobatteryYamaha LS9 MixerMixerLS9 Mixerbus

- Fixed a problem in which the backup battery voltage may be accidently indicated as "LOW," when there is actually sufficient battery power as indicated in the Voltage field of the SETUP screen.

correctlyfixedM7CLproblemM7CL MixerM7CL Digital MixerYamaha M7CL Digital MixerMixerpostYamaha M7CL Mixerbatterybalance

- It is now possible for Dante-related settings to be initialized when an error occurs on the Dante audio network. - In the DCA/MUTE GROUP ASSIGN MODE popup window, you can now assign names to mute groups. In addition, the DCA group name and mute group name can be shown in this popup window. - Aviom D800-Dante was added as a Dante device that can be detected and patched by the CL series. - For details, refer to the CL Firmware V1.70 supplementary manual. Improvements - The limitations on a Dante DEVICE LABEL have been relaxed. - The default value is panned hard LR rather than CENTER when PAN MODE is set to PAN for a ST IN on the CL console. - If 15 or more channels are registered in the DCA member indication of the OVERVIEW screen, you can now use the multifunction knobs of the Centralogic section to scroll the channels. - A link indicator has been added to the CH LINK MODE popup window, making it easier to determine the currently-assigned link group. - The cue monitor level range has been expanded to -30 dB -- +20 dB.

danteYamaha CL1 Digital MixerYamahaYamaha CL1 Mixing ConsoleCL1 Digital MixerproblemCL1

Fixed bugs - Solved a problem in which, depending on the duration of a momentary power outage, the analog gain value could change, or the HA could no longer be controlled remotely.

Ro8-DYamahaYamaha Ro8-DYamaha Ro8-D MixercorrectlydanterestartedYamaha Ro8-D RACKdvsseries

- In the Initialized state, the STEREO channel L/R are now assigned to the OUTPUT PATCH window of the I/O device. - Now supports Ro8-D SYNC, SYSTEM indicators. Fixed Bugs: - In the QL firmware V1.07, you can remotely control the internal HA of a QL series by using the Port to Port function, from additional QL series or CL series (firmware V2.03 or later) consoles. - Solved a problem in which "With Recall" could not be enabled on external consoles, when QL's internal HA settings were recalled by the scene on the QL itself. - Solved a problem in which the corresponding HA settings on the remote QL would not correctly recall, when you recalled an Input Channel Library. - Solved a problem in which the function of Rio’s HA REMOTE did not work correctly if you changed the DANTE PATCH from an external device when you turned OFF the MIXER SETUP of the USER LEVEL. - Solved a problem in which the DIRECT PLAY of RECODER allocated to the USER DEFINED key or the CH OPERATION in the USER LEVEL page was not set correctly, when you were logged in as a guest. - Solved a problem in which the changing link parameters in the link group might be applied in another group. - Solved a problem in which the set value of the gain was not pasted correctly, when you executed the paste operation where the Gain Compensation was changed from ON to OFF in the Global paste.

Yamaha QL1 Mixing ConsoleseriesYamahaYamaha QL1 Digital MixerQL1QL1 Digital Mixersolveddante

- The IP SELECT MODE function is assigned to DIP switches 2 and 3 as an IP address setup for remote control. There are three settings: AUTO IP (conventional setup), DHCP, and STATIC IP (192.168.0. "UNIT ID"). When using R REMOTE, set this to AUTO IP. - Now supports a latency value of 2.0msec for Dante. Fixed bugs:

setupRio3224-DYamaha Rio3224-D MixerYamaha Rio3224-DautoYamaha Rio3224-D RACKdipYamaha

- In the Initialized state, the STEREO channel L/R are now assigned to the OUTPUT PATCH window of the I/O device. - Now supports Ro8-D SYNC, SYSTEM indicators. Fixed Bugs: - In the QL firmware V1.07, you can remotely control the internal HA of a QL series by using the Port to Port function, from additional QL series or CL series (firmware V2.03 or later) consoles. - Solved a problem in which "With Recall" could not be enabled on external consoles, when QL's internal HA settings were recalled by the scene on the QL itself. - Solved a problem in which the corresponding HA settings on the remote QL would not correctly recall, when you recalled an Input Channel Library. - Solved a problem in which the function of Rio’s HA REMOTE did not work correctly if you changed the DANTE PATCH from an external device when you turned OFF the MIXER SETUP of the USER LEVEL. - Solved a problem in which the DIRECT PLAY of RECODER allocated to the USER DEFINED key or the CH OPERATION in the USER LEVEL page was not set correctly, when you were logged in as a guest. - Solved a problem in which the changing link parameters in the link group might be applied in another group. - Solved a problem in which the set value of the gain was not pasted correctly, when you executed the paste operation where the Gain Compensation was changed from ON to OFF in the Global paste.

seriesYamahadanteYamaha QL5 Mixing ConsoleQL5Yamaha QL5 Digital MixersolvedQL5 Digital Mixer

- The IP SELECT MODE function is assigned to DIP switches 2 and 3 as an IP address setup for remote control. There are three settings: AUTO IP (conventional setup), DHCP, and STATIC IP (192.168.0. "UNIT ID"). When using R REMOTE, set this to AUTO IP. - Now supports a latency value of 2.0msec for Dante. Fixed bugs:

YamahaYamaha Ro8-DRo8-DYamaha Ro8-D MixerYamaha Ro8-D RACKautodipsetup

- Now supports Yamaha Console Extension V2.0. - New functions have been added that can be set for GPI OUT. - New functions have been added that can be assigned to the USER DEFINED keys, the USER DEFINED knobs and the assignable encoders (GAIN/PAN/ASSIGN knobs). - Now supports a latency value of 2.0msec for Dante. - Now supports QL Firmware V1.07. Improvements: - Now supports Ro8-D SYNC, SYSTEM indicators. - In the 8ch popup window of the SELECTED CHANNEL VIEW screen, you can now use the [SEL] keys to switch channels that are displayed. - When you initialize the unit, the initial setting of the WORD CLOCK is now changed to DANTE 48k in order to be synchronized to the same clock between devices in the system where multiple CL/QL units are used even with the initial settings. - When you initialize the unit including the Dante audio network setting or updated the firmware, the initial setting of "Preferred Master" is now changed to ON. In addition, this setting is now not affected by the console setting and restart, but can be changed on Dante Controller software when needed. With the initial setting, if you change the word clock setting to other than DANTE for a CL/QL unit, the console will preferentially become the clock master, which would prevent clock errors. If needed, you can manually select the clock master on Dante Controller by enabling "Preferred Master" on a single device (the others off), which is always powered on while the system is operational.

Yamaha CL3 Mixing ConsoleCL3settingYamahaproblemCL3 Digital MixerdanteYamaha CL3 Digital Mixer

- Fixed a problem in which even if [Display Log Buffer Full Message] in the "Log Setup" dialog box of DME Designer was unchecked; the "Log Buffer Full" message would be shown on the unit's display. Important Notice - The hardware specification for DME Firmware V3.5x or earlier differs from the one for Firmware V3.8x or later (including V4.0). Therefore firmware V3.5x or earlier cannot be upgraded to V3.81 or later. Also, firmware V3.81 or later cannot be downgraded to V3.5x or earlier. (This does not apply to the SP2060 or ICP1.) If you need to upgrade your DME from V3.5x or earlier to V3.81 or later (including V4.0), please contact your Yamaha dealer.

Yamaha DME-N ProcessorearlierdmeYamaha DME24N DSP UnitYamaha DME24N ProcessorlogDME24NdafsceneYamaha

- Fixed a problem in which even if [Display Log Buffer Full Message] in the "Log Setup" dialog box of DME Designer was unchecked; the "Log Buffer Full" message would be shown on the unit's display. Important Notice - The hardware specification for DME Firmware V3.5x or earlier differs from the one for Firmware V3.8x or later (including V4.0). Therefore firmware V3.5x or earlier cannot be upgraded to V3.81 or later. Also, firmware V3.81 or later cannot be downgraded to V3.5x or earlier. (This does not apply to the SP2060 or ICP1.) If you need to upgrade your DME from V3.5x or earlier to V3.81 or later (including V4.0), please contact your Yamaha dealer.

ProcessorDME8i-CscenelogdafYamahaYamaha DME8i-CdmeearlierYamaha DME8i-C Processor

- Fixed a problem in which even if [Display Log Buffer Full Message] in the "Log Setup" dialog box of DME Designer was unchecked; the "Log Buffer Full" message would be shown on the unit's display. Precautions - If the IP address of the DME device is changed after the device has been synchronized with DME Designer, it will be necessary to re-transfer the configuration data by performing a “Full Resync” operation to ensure proper operation of GPI control, MIDI control, Remote control, and DME Designer meter display functions.

dmeYamaha DME64N ProcessorDME64NsceneearlierYamahadesignerfileYamaha DME-N ProcessoroperationYamaha DME64N DSP Unit

«« « 12 » »»