Download Sound Devices drivers

«« « 12 » »»

- New - STOP+LAMP shortcut for quick access to Circling or NG'ing the last recorded take. - New - add ability to change take status of any take from the take list. - New - addition of iXML (v1.52) parameters including <FALSE_START>, <NO_GOOD>

foldersSound Devices702702 Sound Recorder702 Two-Trackdaily702 Audio Recorder

- New - STOP+LAMP shortcut for quick access to Circling or NG'ing the last recorded take. - New - add ability to change take status of any take from the take list. - New - addition of iXML (v1.52) parameters including <FALSE_START>, <NO_GOOD>

folders702T702T Audio RecorderdailySound Devices702T Two-Track702T Sound Recorder

- Fix - Low level File system improvements.

722 Two-Trackhighsampleremovedrecordingshpf722 Sound RecorderSound Devices722 Audio Recorderfixenabledrate722

- Low level File system improvements.

hpfhighrecordingsrateSound Devices702 Audio Recorderenabled702samplelevel702 Two-Trackremoved702 Sound Recorder

- Save and load user settings to internal memory.

conditions552Sound Devicescardspreventing552 Field Mixercontroltransportimprovedsemilockup

- Fix - Low level File system improvements.

Sound Devices744T Audio Recorder744Thighratefix744T Four-Track744T Sound Recorderremovedrecordingsenabledsamplehpf

- Fix - Low level File system improvements.

removedhigh702T Two-Trackenabledhpf702T Audio Recorderfixrecordings702T Sound RecorderSound Devices702Tratesample

- Option to decode MS into LR MIX only and leave ISO tracks as un-decoded MS. - Added limiters for digital inputs (AES3 and AES42). - Faster drive formatting. - Added new Timecode mode, 'Free Run - Auto Output Mute'. This is the same as Free run mode, but mutes the Lemo timecode output when stopped. This can be used to roll external devices when Rec run timecode is not suitable. Change:

788T Twelve-Track788T Audio RecorderoutputSound Devicesmoderun788T Sound Recordertimecode788Tadded

- Option to decode MS into LR MIX only and leave ISO tracks as un-decoded MS. - Added limiters for digital inputs (AES3 and AES42). - Faster drive formatting. - Added new Timecode mode, 'Free Run - Auto Output Mute'. This is the same as Free run mode, but mutes the Lemo timecode output when stopped. This can be used to roll external devices when Rec run timecode is not suitable. Change:

Sound Devices788T-SSD Sound Recorderoutputadded788T-SSD788T-SSD Audio Recordermoderuntimecode788T-SSD Twelve-Track

- Fixed - DC offset issue with A/D values.

Sound Devices USBPrefixedfixesUSBPreUSBPre Sound ToolUSBPre Audio TooloffsetvaluesSound Devicesissue

- Fixed - bug in which the recorder's drive(s) would would not properly mount when connected via FireWire to Mac OS X 10.6 (Snow Leopard).

702 Sound RecorderSound Devices702mountsnowconnectedmacfirewireleopard702 Audio Recorder702 Two-Track

- New - STOP+LAMP shortcut for quick access to Circling or NG'ing the last recorded take. - New - add ability to change take status of any take from the take list. - New - addition of iXML (v1.52) parameters including <FALSE_START>, <NO_GOOD>

folders722 Two-TrackSound Devicesdaily722 Sound Recorder722 Audio Recorder722

- Fixed - bug in which the recorder's drive(s) would would not properly mount when connected via FireWire to Mac OS X 10.6 (Snow Leopard).

722722 Sound Recorderfirewire722 Two-TrackmountleopardsnowSound Devicesconnected722 Audio Recordermac

- New: Ability to set the WiFi channel number of the CL-WIFI in the CL-WIFI: Configure menu.

Sound Devices788T-SSDpassphraseclwifiwarningmeet788T-SSD Sound Recorder788T-SSD Audio Recorderconfigure788T-SSD Twelve-Trackmenuissues

- New - Mix Assist Mode option, On (LR tracks only). Mode allows user to simultaneously create both a mix-assisted mix on LR and a manual mix on any other track set to post-fade. Note: the original MixAssist Mode, 'On' is now called 'On (All tracks follow LR)'. In this mode, all post fade tracks are affected by MixAssist. - Change - LCD contrast is not reset by factory defaults. Reset only by initialize function on bootup. - Change - factory default input-to-track routing changed to '2 mix (L,R), 8 Iso (A-H)' with 10 tracks armed. - Fixed - error conditions displayed incorrectly.

factory788T-SSD Audio RecorderSound Devices788T-SSDmixtracksfixed788T-SSD Sound Recorder788T-SSD Twelve-Track

- New - Mix Assist Mode option, On (LR tracks only). Mode allows user to simultaneously create both a mix-assisted mix on LR and a manual mix on any other track set to post-fade. Note: the original MixAssist Mode, 'On' is now called 'On (All tracks follow LR)'. In this mode, all post fade tracks are affected by MixAssist. - Change - LCD contrast is not reset by factory defaults. Reset only by initialize function on bootup. - Change - factory default input-to-track routing changed to '2 mix (L,R), 8 Iso (A-H)' with 10 tracks armed. - Fixed - error conditions displayed incorrectly.

tracksfactory788T Audio Recordermix788T788T Twelve-Trackfixed788T Sound RecorderSound Devices

Fixes: - Metering freeze. Meters would stop moving and eventually result in a subsequent lockup. - Faster formatting on SD cards. - Improved performance for SD cards up to 32 GB in size. (Note: improved performance for cards 64 GB and larger will be addressed in a future firmware release).

samplingpeakaes664 Field Mixer664cardsfixoptionmeterSound Devices

- Fix - a rare bug in which the meter did not always switch from the ST signal to the REC SOURCE signal. - Fix - a bug which could cause the system to get stuck in Rec Pending mode with select SD cards.

Sound Devicessignal552 Field Mixer552rarebugfixlockup

- Added Headphone User-configurable Presets for a total of 10 Changes: - Internal battery warning threshold comes on below 5.5v instead of 6.0V. - Added confirmation dialogue when loading default track names.

tracktonenamesfixespresentratedefaultSound Devices664 Field Mixerheadphonesadded664

- RTN will now cancel PFL. PFL will temporarily override RTN program when PFL is active. - Tone will now latch if held for 1 second as opposed to 2 seconds. Fixes: - Various screen drawing improvements. - Lock up caused by rapidly activating/deactivating tone Handling of CF and SD transfer errors.

664Sound Devicesplayback664 Field Mixerpopuppflprogram

- Added support for 64ch Dante devices - Added ability to view long source and track names in Audio Screen (press and hold stop key) Fixes: - Faster scrolling in Audio Screen - Various improvements to PIXNET browser remote control - Rare lockup when loading factory defaults - Lockup going into record from splash screen - Various audio glitches in playback - Various SDEF issues - Various Sync ref issues

PIX 260i Video RecorderoutputsSound DevicesvideoPIX 260i Rack MountPIX 260i Video PlayerinputdantePIX 260iadded

- Support for Video ref (Sync In). - Added warning message and flashing transport LEDs when two or more Dante devices have the same name on a Dante network since this can cause conflicts. - Drives can now be formatted over Ethernet from PIXNET. - Number of armed audio tracks is now shown in PIXNET audio input OSD field. Fixes: - Encode errors causing playback to stop prematurely. - Rare video input unlock condition which could cause random file splits. - Audio is now seamless over a file split. - Lockup bug due to plugging in HPs when USB keyboard is connected. - Lockup bug due to transport commands looping between grouped units.

audioPIX 260i Rack MountPIX 260i Video RecorderPIX 260iSound DevicesethernetfilePIX 260i Video Playeraddedmode

- Fix: 1080i50 HD-SDI input interpreted incorrectly as 1080PsF25 - Fix: no SDI out time code during playback without video input connected - Fix: time code hold-off not canceling when time code stops during hold-off period - Fix: random rec start/stop with FS700 and time code trigger mode

Sound Devices PIX 220iPIX 220i Video PlayerSound DevicessdiPIX 220i Video RecorderholdofffixinputcodePIX 220i

- Added: SDI Output Type menu for switching output between HD 4:2:2 and 3G 4:4:4 - Added: Menu option for displaying timecode and transport status overlay on SDI and or HDMI outputs. - Increased: Audio delay range to 500ms Fixes:

PIX 220itimecodebitSound Devices PIX 220ioutputaddedfixPIX 220i Video PlayersdiPIX 220i Video RecorderlevelSound Devices

- Added: SDI Output Type menu for switching output between HD 4:2:2 and 3G 4:4:4 - Added: Menu option for displaying timecode and transport status overlay on SDI and or HDMI outputs. - Increased: Audio delay range to 500ms Fixes:

PIX 240ifixbitSound Devices PIX 240iPIX 240i Video PlayersdiPIX 240i Video RecorderSound Devicesoutputleveltimecodeadded

- Fixed - Locks to S/PDIF sample rate of 32 kHz, 44.1 kHz, and 176.4 kHz in stand-alone mode.

sampleSound DevicesUSBPre Audio ToolUSBPrekhzUSBPre Sound ToolratechannelSound Devices USBPrestatusbitspdifincluded

- Fix: 1080i50 HD-SDI input interpreted incorrectly as 1080PsF25 - Fix: no SDI out time code during playback without video input connected - Fix: time code hold-off not canceling when time code stops during hold-off period - Fix: random rec start/stop with FS700 and time code trigger mode

Sound Devices PIX 240iPIX 240i Video PlayerinputSound DevicesPIX 240ifixcodePIX 240i Video Recorderholdoffsdi

- Fixed - Locks to S/PDIF sample rate of 32 kHz, 44.1 kHz, and 176.4 kHz in stand-alone mode.

statusSound DeviceskhzpdifSound Devices USBPreincludedchannelUSBPresampleUSBPre Sound ToolbitsrateUSBPre Audio Tool

- Fixed: Headphone burst noise during boot up. - Fixed: RTN monitoring now follows current headphone preset mono status. - Fixed: No Record bells in headphone monitor when monitoring the X1 X2 tracks. - Fixed: Deleted notes metadata now remains deleted after a power cycle. - Fixed: Track name edits from channel screen while recording are now applied to current take as well as next take. - Fixed: Several USB Keyboard connection issues. - Other minor improvements and fixes. Known Issues - If notes are deleted, then the 664 is power cycled, the notes re-appear. A workaround is to replace the notes with the space character. - During recording, track name edits from a channel screen only affect the next take to be recorded, not the current one being recorded. Workaround is to edit the current track names from the take list, or edit track names before or after recording.

664664 Field MixermonitorplaybacktrackfixednotesSound Devices

«« « 12 » »»