Download NETGEAR drivers 14th

* Attention WN121T Users - To maintain WMM interoperability between WN121T and WNR834B in 802.11n mode, you must upgrade the firmware on WNR834B to version V1.0.3.8 or above and also upgrade your WN121T software to version 4.0 or above. Enhancements and Fixes 1. Wi-Fi Certified 802.11n draft 2.0 firmware release 2. Improve the auto ugrade feature.

wnbWN802TlatestwntWirelessversionNetgearWireless RouterupgradeNetgear WNR834Bv1

4. Fixes that the client adapter is able to connect to the router using old security settings. 5. Reduces the time to detect a new DCHP server. 6. Reduces the time to establish a PPPoE connection after router firmware upgrade. 7. Fixes WG511 client adapter not being able to connect to the router. 8. Fixes client adapter not being able to display www.google.com. 9. Fixes that DynDNS was not always updating. 10. Fixes the cancel buttom during the auto upgrade. It now correctly terminates the auto upgrade. 11. Fixes incorrect DOS message on the router log. The excessive DOS messages might have impacted router performance. Known Issues 1. There is a long delay when changing wireless settings. The program bar will indicate when the changes are made.

routerNetgearconnectionupgradeNorth AmericafixesNetgear WNR834Bv1Wireless RouterWN802T

4. Fixes that the client adapter is able to connect to the router using old security settings. 5. Reduces the time to detect a new DCHP server. 6. Reduces the time to establish a PPPoE connection after router firmware upgrade. 7. Fixes WG511 client adapter not being able to connect to the router. 8. Fixes client adapter not being able to display www.google.com. 9. Fixes that DynDNS was not always updating. 10. Fixes the cancel buttom during the auto upgrade. It now correctly terminates the auto upgrade. 11. Fixes incorrect DOS message on the router log. The excessive DOS messages might have impacted router performance. Known Issues 1. There is a long delay when changing wireless settings. The program bar will indicate when the changes are made.

NetgearWireless RouterfixesconnectionWorld WideupgradeNetgear WNR834Bv1WN802T

Known Issues 1. If you configure the router in WEP & WPA-PSK type for 130/270Mbps mode, the throughput will be low (around 40 Mbps.) Its recommend to use WPA2-PSK or none security mode to achieve the optimized performance.

modeNetgear WNR834Bv2NetgearupgradembpsWireless RouterWNR834Bv2Wireless

1. Fixed Broadcom Ethernet driver hang issue caused by IXIA stress test. 2. Set bridge module MAC address table up to 1024 entries to avoid the memory shortage by unlimited learning. 3. Detects RCA Modem Dynamic IP as Static IP consistently

Wireless RouterNetgear WNR834Bv2connectionWNR834Bv2modeNetgearmbps

1. 802.11n draft 2.0 Wi-Fi Certified. Known Issues 1. If you configure the router in WEP & WPA-PSK type for 130/270Mbps mode, the throughput will be low (around 40 Mbps.) Its recommend to use WPA2-PSK or none security mode to achieve the optimized performance.

NetgearmbpsWireless RouterWirelessmodeWNR834Bv2Netgear WNR834Bv2

4. Fixed Vista wireless client incorrectly detect router as WPA-enterprise security if WPS function is enabled. (Note: This bug occurs on v1.0.30 only) 5. Fixed issues - Web UI sometimes hang issue. 6. Fixed the Router Status page sometimes show SSID incorrectly. 7. NAT bug fix: PPTP port forwarding issue 8. Revised default PPTP MTU to 1436. 9. Fixed the bug if received error in PADO / PADS messages from server, it will not auto reconnect even if dial on demand if on. 10. NAT bug fix: Same source PC to any other WAN side should reuse the same source port. 11. NAT bug fix: Different source protocol to another WAN side should reuse the same source port. Known Issues 1. If you configure the router in WEP & WPA-PSK type for 130/270Mbps mode, the throughput will be low (around 40 Mbps.) Its recommend to use WPA2-PSK or none security mode to achieve the optimized performance.

WirelessWireless RoutersourceissuemodeclientfixedNetgearrouterbugNetgear WNR834Bv2

NETGEAR has been a worldwide provider of technologically advanced,...

deviceproviderNetgearinstallingnetworkingWNR834MWirelesspointNetgear WNR834Msystem

2. Added support to Block newsgroups. 3. Support exclusive access to the router administration page. Fixes 1. Remote Management works properly. 2. Port triggering functionality is restored. 3. Internet connection type detection is improved. 4. Block Sites feature works properly. 5. MTU change handling works. 6. Router will now log "Block service" and "Remote management" events. 7. Conflicting port forwaring entries and MAC address reservation entries are not allowed any more.

WirelessblockaddedNetgear WNR834MWNR834MconnectiondeviceNetgearworks

NETGEAR has been a worldwide provider of technologically advanced,...

WirelesspointdeviceWNR834MsystemproviderNetgear WNR834MinstallingNetgearnetworking

1. New Auto Firmware update functionality is added. 2. Improved throughput with Broadcom Clients in 802.11n mode. 3. Supports WEP Share Key authentication. Fixes 1. Block Sites according to Schedule works properly.

routermodeNetgear WNR834MNetgearWirelessNorth America OnlyconnectionWNR834Mblock

Do not upgrade the firmware using a wireless connection. Please perform firmware upgrade with “wired” or Ethernet connection only. New Features 1. Improved wireless performace at mid to long distance from the router.

addressNetgear WNR834MWNR834MNetgearrouterWirelessversion

New Features 1. Improve wireless performance in the WPA-PSK mode. 2. Support the auto-channel function. Fixes

WNR834MmodeWirelesswntNetgear WNR834MNetgear

You MUST Reset the router to default settings after upgrading the firmware. Do not upgrade the firmware using a wireless connection. Please perform firmware upgrade with “wired” or Ethernet connection only.

Netgear WNR834MversionWNR834MWirelessupgradedeviceNetgearwntconnection

2. Port triggering does not work under certain circumstances. 3. SPI firewall does not work. 4. WEP, WPA and WPA2 do not work under certain circumstances. 5. Some values that you change are not reported correctly. 6. Daylight Saving Time does not work.

WNR854TwpaNetgear WNR854TNetgearworkWirelessdevicecircumstances

Fixes 1. The Attached Device page correctly shows which computers are on the LAN. 2. Daylight Saving Time feature works correctly. 3. Special characters may now be used in router GUI fields Host Name, User Name, Password, SSID, and Address Reservation Device Name. If you use a special character, a backslash "" character is added before it. 4. Stability is improved when using PPP. 5. WEP Open Mode now works with the NETGEAR WG511v2 adapter. 6. The initialization log now displays correct date. Known Issues 1. Light status is not corrrect in various situations. 2. Port triggering does not work under certain circumstances.

WNR854TNetgearfeatureWirelessworkNetgear WNR854Tadded

1. Router GUI does not support Netscape, Firefox or Safari browsers. 2. Light status is not corrrect in various situations. 3. Port triggering does not work under certain situations. 4. Block Site allows only up to 10 entries. 5. Block Site does not always work with some strings. 6. Multiple port forwarding entries with the same port number, but differing IPs can be added. 7. WEP, WPA and WPA2 do not work under certain situations. 8. Log messages are not generated for blocked services or remote management. 9. UPnP settings cannot be changed. 10. MTU handling does not work.

Netgear WNR854TWirelessblockWNR854TworksituationsNetgear

2. Auto firmware update is added to this firmware release. 3. Added 802.11n A-MPDU aggregation support in the receiving direction. 4. Supports WEP Shared Key authentication type Fixes 1. Block Sites by Schedule option works properly. 2. Fixed a bug which caused the router to reset when attempting to change its LAN IP address. 3. Improved wireless throughput. 4. IP Address reserversations work properly even after a router reboot. Known Issues 1. Trusted IP Setting in Block Site cannot be set outside the IP Address pool of DHCP Server - irrespective of whether the DHCP Server is enabled/disabled.

wpaworkWirelessWNR854TNetgearroutermodeNetgear WNR854T

New Features 1. Improve wireless performance at the mid to long range distance from the router. Fixes 1. Fixed a bug where MSN Remote Assistant did not work properly behind the router (A LAN PC cannot invite for assistance from another MSN user on the Internet.)

WNR854TNetgearNetgear WNR854TWirelessmodewparouter

NETGEAR has been a worldwide provider of technologically advanced,...

providersysteminstallingdeviceNetgearNetgear WNR854TWirelesspointWNR854Tnetworking

* Router supports the following wireless modes: o “Up to 54 Mbps” - 11b/g o “Up to 300 Mbps” - 11 b/g/Next (20/40 MHz) and o “Up to 145 Mbps” - 11n in 20 MHz only and 11 b/g. * Default wireless default setting is now “Up to 145 Mbps”. To connect at 300Mbps, Users must change the wireless mode from the “Wireless Setting” page or in the Setup Wizard after the router is restored to the factory defaults.

WNR854TwirelessNetgear WNR854TNetgeardefaultroutermbps

You MUST Reset the router to default settings after upgrading the firmware Note: Do not upgrade the firmware using a wireless connection. Please perform firmware upgrade with “wired” or Ethernet connection only.

NetgearwntdeviceversionWirelessconnectionNetgear WNR854TupgradeWNR854T

Fixes 1. Light status indications work properly. 2. Port triggering functionality is restored. 3. Block Sites feature works properly. 4. Duplicate port forwarding entries cannot be added.

deviceworksNetgear WNR854TmanagementupgradePCINetgear

Note: Do not upgrade the firmware using a wireless connection. Please perform firmware upgrade with “wired” or Ethernet connection only. Bug Fixes / New Features: * Fixed bug with Dynamic IP (DHCP) Internet connection - host name configuration never takes effect.

NetgearproviderfixedWNR854TNetgear WNR854TWirelessconnection

Note: Do not upgrade the firmware using a wireless connection. Please perform firmware upgrade with “wired” or Ethernet connection only. New Features / Bug Fixes: * 802.11n Draft 2.0 Compatible

NetgearNetgear WNR854TupgradenetworkingWNR854TWirelessproviderwnt

New Features / Bug Fixes: * 802.11n Draft 2.0 Compatible * Fixed router hang issue when connecting with Broadcom clients under specific conditions. * Fixed MTU issues.

NetgearissuesconnectionversionWirelessNetgear WNR854TWNR854Tfixed

NETGEAR has been a worldwide provider of technologically advanced,...

deviceWirelesssystemNetgearpointNetgear WPN111installingnetworkingprovider

New Features and Enhancements

devicenetworkingWPN111WirelessNetgearNetgear WPN111supportwindowsprovider

* Adds domain login support. * Improves SmartWizard installation utility. * Now correctly reports connection status when router is not connected to Internet.

Netgear WPN311connectedsupportaddsWPN311deviceNetgearWireless

* Add support for network domain Login. Fixes

Netgear WPN311providerWirelessWPN311windowsNetgeardevicenetworking