Gigabyte GA-P67A-UD7 (rev. 1.0) Marvell SATA3 RAID Utility 4.1.0.1905

Operating systemsOS : Windows XP / Windows Vist
ManufacturerManufacturer : Marvell
CreatedCreated : Dec 27, 2010
Size downloadDownloads : 1
Program licensing
Thank you for driver voting...

cpu
1. ports 2nd Generation Intel Core processors in the LGA1155 package
Chipset
1. Intel P67 Express Chipset
Memory
1. 4 x 1.5V DDR3 DIMM sockets support up to 16 GB of system memory
* Due to Windows 32-bit operating system limitation, when more than 4 GB of physical memory is installed, the actual memory size displayed will be less than 4 GB.
2. Dual channel memory architecture
3. Support for DDR3 2133/1866/1600/1333/1066 MHz memory modules
4. Support for non-ECC memory modules
5. Support for Extreme Memory Profile (XMP) memory modules
Audio
1. Realtek ALC889 codec
2. High Definition Audio
3. 2/4/5.1/7.1-channel
4. Support for Dolby Home Theater
5. Support for S/PDIF Out
LAN
1. 2 x Realtek RTL8111E chips (10/100/1000 Mbit)
2. Support for Teaming
3. Support for Smart Dual LAN
Expansion Slots
1. 2 x PCI Express x16 slots, running at x16 (PCIEX16_1, PCIEX16_2)
2. 2 x PCI Express x16 slots, running at x8 (PCIEX8_1, PCIEX8_2)
3. 1 x PCI Express x1 slot
4. 2 x PCI slots
Multi-Graphics Technology
1. Support for 2-Way/3-Way ATI CrossFireX/NVIDIA SLI technology
Storage Interface Chipset:
1. 2 x sata 6Gb/s connectors (sata3_0, sata3_1) supporting up to 2 sata 6Gb/s devices
2. 4 x SATA 3Gb/s connectors (SATA2_2~SATA2_5) supporting up to 4 SATA 3Gb/s devices
3. Support for SATA raid 0, raid 1, raid 5, and raid 10
* When a RAID set is built across the SATA 6Gb/s and SATA 3Gb/s channels, the system performance of the RAID set may vary depending on the devices being connected.
2 x Marvell 88SE9128 chips:
1. 2 x SATA 6Gb/s connectors (GSATA3_6, GSATA3_7) supporting up to 2 SATA 6Gb/s devices
2. Support for SATA RAID 0 and RAID 1
3. 2 x eSATA 6Gb/s connectors (eSATA/usb Combo) on the back panel supporting up to 2 SATA 6Gb/s devices
4. Support for SATA RAID 0 and RAID 1
USB Chipset:
1. Up to 8 USB 2.0/1.1 ports (4 on the back panel, including 2 eSATA/USB Combo, 4 via the USB brackets connected to the internal USB headers)
2 x Renesas D720200 chips and 2 x VLI VL810 hubs:
1. Up to 10 USB 3.0/2.0 ports (6 on the back panel, 4 via the USB brackets connected to the internal USB headers)
* The USB 2.0 signals of the 6 USB 3.0/2.0 ports on the back panel are from the Chipset.
IEEE 1394
T.I. TSB43AB23 chip:
1. Up to 3 IEEE 1394a ports (2 on the back panel, 1 via the IEEE 1394a bracket connected to the internal IEEE 1394a header)
Internal I/O Connectors
1. 1 x 24-pin ATX main power connector
2. 1 x 8-pin ATX 12V power connector
3. 4 x SATA 6Gb/s connectors
4. 4 x SATA 3Gb/s connectors
5. 1 x CPU fan header
6. 3 x system fan headers
7. 1 x power fan header
8. 1 x Chipset fan header
9. 1 x front panel header
10. 1 x front panel audio header
11. 1 x S/PDIF Out header
12. 2 x USB 2.0/1.1 headers
13. 2 x USB 3.0/2.0 headers
14. 1 x IEEE 1394a header
15. 1 x clearing CMOS button
16. 1 x power button
17. 1 x reset button
Back Panel Connectors
1. 1 x PS/2 keyboard/mouse port
2. 1 x optical S/PDIF Out connector
3. 1 x coaxial S/PDIF Out connector
4. 2 x IEEE 1394a ports
5. 2 x USB 2.0/1.1 ports
6. 6 x USB 3.0/2.0 ports
7. 2 x eSATA/USB Combo connectors
8. 2 x RJ-45 ports
9. 6 x audio jacks (Center/Subwoofer Speaker Out/Rear Speaker Out/Side Speaker Out/Line In/Line Out/Microphone)
I/O Controller
1. iTE IT8728 chip
H/W Monitoring
1. System voltage detection
2. CPU/System temperature detection
3. CPU/System/Power fan speed detection
4. CPU overheating warning
5. CPU/System/Power fan fail warning
6. CPU/System fan speed control
*Whether the CPU/system fan speed control function is supported will depend on the CPU/system cooler you install.
BIOS
1. 2 x 32 Mbit flash
2. Use of licensed AWARD BIOS
3. Support for DualBIOS
4. PnP 1.0a, DMI 2.0, SM BIOS 2.4, ACPI 1.0b
Unique Features
1. Support for @BIOS
2. Support for Q-Flash
3. Support for Xpress BIOS Rescue
4. Support for Download Center
5. Support for Xpress Install
6. Support for Xpress Recovery2
7. Support for EasyTune
8. * Available functions in EasyTune may differ by motherboard model. Support for Dynamic Energy Saver 2
9. Support for Smart 6
10. Support for Auto Green
11. Support for eXtreme Hard Drive (X.H.D)
12. Support for ON/OFF Charge
13. Support for Cloud OC
14. Support for Q-Share
Bundle Software
1. Norton Internet Security (OEM version)
Form Factor
1. ATX Form Factor; 30.5cm x 24.4cm
Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.

Gigabyte GA-P67A-UD7 (rev. 1.0) Marvell SATA3 RAID Utility 4.1.0.1905 driver tags:

GA-P67A-UD7, usb, Marvell RAID Utility, motherboard, Gigabyte GA-P67A-UD7, ports, system, support, raid, fan, 1905, Gigabyte, cpu, sata. You may download directly. Please write the reviews of the Gigabyte GA-P67A-UD7 (rev. 1.0) Marvell SATA3 RAID Utility 4.1.0.1905.

Similar Gigabyte GA-P67A-UD7 (rev. 1.0) Marvell SATA3 RAID Utility 4.1.0.1905 software drivers:

Gigabyte GA-Z87X-OC (rev. 1.0) Intel SATA Preinstall Driver 12.6.0.1033 for Windows 7/Windows 8 64 bit - - Unique OC Brace Feature, Gigabyte GA-Z87X-OC (rev. 1.0) Intel MEI Driver 9.0.2.1345 for Windows 7/Windows 8 - Key Features:, Gigabyte GA-Z87X-OC (rev. 1.0) Intel SATA Preinstall Driver 12.6.0.1033 for Windows 7/Windows 8 - - Unique OC Brace Feature