Gigabyte GA-880GM-USB3 (rev. 3.1) Etron USB 3.0 Driver 1.0.0.0098

Operating systemsOS : Windows XP / Windows Vist
ManufacturerManufacturer : Etron
CreatedCreated : May 4, 2011
Size downloadDownloads : 2
Program licensing
Thank you for driver voting...

CPU AM3+ Socket:
Support for amd AM3+ processor
Support for AMD AM3 Phenom II processor / AMD Athlon II processor
Hyper Transport Bus
5200 MT/s
Chipset
North Bridge: AMD 880G
South Bridge: AMD SB710
Memory
4 x 1.5V DDR3 DIMM sockets supporting up to 16 GB of system memory
Dual channel memory architecture
Support for DDR3 1800(O.C.)/1333/1066 MHz memory modules
Onboard Graphics
North Bridge:
1 x D-Sub port
1 x DVI-D port, supporting a maximum resolution of 1920x1200
1 x HDMI port, supporting a maximum resolution of 1920x1200
Audio
Realtek ALC889 codec
High Definition Audio
2/4/5.1/7.1-channel
Support for Dolby Home Theater
Support for S/PDIF In/Out
LAN
1 x Realtek 8111E chip (10/100/1000 Mbit)
Expansion Slots
1 x PCI Express x16 slot, running at x16
1 x PCI Express x1 slot
(All PCI Express slots conform to PCI Express 2.0 standard.)
2 x PCI slots
Multi-Graphics Technology
Support for ATI Hybrid CrossFireX technology
Storage Interface
South Bridge:
5 x SATA 3Gb/s connectors supporting up to 5 SATA 3Gb/s devices
1 x eSATA 3Gb/s connectors on the back panel supporting up to 1 SATA 3Gb/s device
Support for SATA RAID 0, RAID 1, RAID 10, and JBOD
usb
South Bridge:
Up to 10 USB 2.0/1.1 ports (4 on the back panel, 6 via the USB brackets connected to the internal USB header)
Etron EJ168 chip:
Up to 2 USB 3.0/2.0 ports on the back panel
IEEE 1394
T.I. TSB43AB23 chip:
Up to 2 IEEE 1394a ports (1 on the back panel, 2 via the IEEE 1394a bracket connected to the internal IEEE 1394a header)
Internal I/O Connectors
1 x 24-pin ATX main power connector
1 x 8-pin ATX 12V power connector
5 x SATA 3Gb/s connectors
1 x CPU fan header
1 x system fan header
1 x front panel header
1 x front panel audio header
1 x S/PDIF Out header
3 x USB 2.0/1.1 headers
1 x IEEE 1394a header
1 x serial port header
1 x clearing CMOS jumper
Back Panel Connectors
1 x PS/2 keyboard/mouse port
1 x D-Sub port
1 x DVI-D port
1 x HDMI port
1 x optical S/PDIF Out connector
1 x eSATA 3Gb/s port
4 x USB 2.0/1.1 ports
2 x USB 3.0/2.0 ports
1 x RJ-45 port
6 x audio jacks (Center/Subwoofer Speaker Out/Rear Speaker Out/Side Speaker Out/Line In/Line Out/Microphone)
I/O Controller
ITE IT8720 chip
H/W Monitoring
System voltage detection
CPU/System temperature detection
CPU/System fan speed detection
CPU overheating warning
CPU/System fan fail warning
CPU/System fan speed control
BIOS
2 x 16 Mbit flash
Use of licensed AWARD BIOS
Support for DualBIOS
PnP 1.0a, DMI 2.0, SM BIOS 2.4, ACPI 1.0b
Unique Features
Support for @BIOS
Support for Q-Flash
Support for Xpress BIOS Rescue
Support for Download Center
Support for Xpress Install
Support for Xpress Recovery2
Support for EasyTune
Support for Easy Energy Saver
Support for Smart Recovery
Support for Auto Green
Support for On/Off Charge
Support for Cloud OC
Support for Q-Share
Bundle Software
Norton Internet Security (OEM version)
Form Factor
Micro ATX; 24.4cm x 24.4cm
Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.

Gigabyte GA-880GM-USB3 (rev. 3.1) Etron USB 3.0 Driver 1.0.0.0098 driver tags:

system, Gigabyte, USB, Gigabyte GA-880GM-USB3, 0098, header, amd, fan, GA-880GM-USB3, Etron USB, usb, panel. You may download motherboard_driver_etron_usb3.exe directly. Please write the reviews of the Gigabyte GA-880GM-USB3 (rev. 3.1) Etron USB 3.0 Driver 1.0.0.0098.

Similar Gigabyte GA-880GM-USB3 (rev. 3.1) Etron USB 3.0 Driver 1.0.0.0098 software drivers:

EVGA Classified SR-2 Renesas USB 3.0 Driver 2.1.19.0 - c) Connect USB3.0 devices to a USB3.0 port during S3 state., EVGA X79 Classified ASMedia USB 3.0 Driver 1.6.3.0 - This issue only occurs with Ver.2.1.16.0., EVGA X79 FTW ASMedia USB 3.0 Driver 1.14.8 - - There is a possibility that USB devices can't be detected after remote wakeup. This issue only occurs with Ver.2.1.16.0.