EnGenius EAP300 Access Point Firmware 1.2.1

Operating systemsOS : Windows XP / Windows Vist
ManufacturerManufacturer : EnGenius
CreatedCreated : Sep 26, 2012
Size downloadDownloads : 13
Program licensing
Thank you for driver voting...

Business Class Indoor High-power Long-range 800mW Wireless-N Access

Point/wds/Repeater with Smoke Detector Housing & 802.3af PoE Support
Hardware Specifications
MCU/RF: RTL8196C + RTL8192CE
Memory: 32MB
Flash: 4MB
Physical Interface:
LAN: 1 x 10/100 Fast Ethernet RJ-45
Reset Button
power Jack
LEDs Status
LAN (10/100Mpbs)
WLAN (Wireless connection)
Power Requirement:
Power Supply: 90 to 240 VDC ± 10%, 50/60 Hz
Active Ethernet (Power over Ethernet, IEEE802.3af)
48 VDC/0.375A
Device: 12V/1A
RF Specifications
Wireless Standard: IEEE802.11 b/g/n
Frequency: 2.400 ~ 2.ghz (b/g/n)
Modulation Technologies:
Operating Channels: 11 channels
Transmit Power:
802.11b(2.412 ~ 2.472 GHz)
26 dbm @ 1Mbps
26 dBm @ 2Mpbs
26 dBm @ 5.mbps
26 dBm @ 11Mbps
802.11g(2.412 ~ 2.472 GHz)
26 dBm @ 6Mbps
26 dBm @ 9Mbps
25 dBm @ 12Mbps
25 dBm @ 18Mbps
24 dBm @ 24Mbps
24 dBm @ 36Mbps
23 dBm @ 48Mbps
23 dBm @ 54Mbps
802.11n(2.412 ~ 2.472 GHz)
26 dBm @ mcs/mcs8
26 dBm @ MCS1/MCS9
25 dBm @ MCS2/MCS10
25 dBm @ MCS3/MCS11
24 dBm @ MCS4/MCS12
24 dBm @ MCS5/MCS13
23 dBm @ MCS6/MCS14
23 dBm @ MCS7/MCS15
Receive Sensitivity:
802.11b (2.412 ~ 2.472 GHz) best ≤ -93 dBm
802.11g (2.412 ~ 2.472 GHz) best ≤ -90 dBm
802.11n (2.412 ~ 2.472 GHz) best ≤ -88 dBm
Embedded omnidirectional antenna (Diversity support)
Antenna Gain = 5 dBi
Software Specifications
Topology: Infrastructure/Ad-Hoc
Operation Mode: Access Point/WDS Bridge/WDS AP/Repeater
Multiple BSSID: supports up to 4 BSSIDs
LAN Settings:
IP (check validity and DHCP server IP range)
DHCP range, lease time, client list
VLANs: Supports 802.1q (up to 4 VLANs)
SSID to VLAN mapping
Spanning Tree: Supports 802.1d Spanning Tree Protocol
Wireless mode: 11b/11g/11n
Channel selection (setting varies by country)
Channel bandwidth (Auto, 20MHz, 40MHz)
Transmission rate: 11n only, 11b/g/n mix, 11b only, 11b/g, 11g only
VPN: VPN pass-through (PPTP, L2TP, IPSEC)
WPS: Software only
Security: WEP Encryption - 64/128 bit
WPA Personal (WPA-PSK using TKIP or AES)
WPA Enterprise (WPA-EAP using TKIP)
802.1x Authenticator
SSID broadcast enable/disable
MAC Address Filter (AP mode)
WLAN L2 isolation (AP mode)
Wireless STA (Client) connected list (Idle/Connection Time, Pkt statistics)
Tx Power Control: Adjust transmit power by dBm
Configuration: Web-based configuration (HTTP)/Telnet
Telnet Server: CLI
Firmware Upgrade: Upgrade firmware via web browser
Administrator Setting: Administrator Username & Password change
Reset Setting
Reboot (press 1 second). Reset to Factory Default (press 10 second)
System Monitoring: Status Statistic and Event log
SNMP: V1 , V2c
MIB: MIB I , MIB II(RFC1213) and Private MIB
Traffic Measurement: Per interface
Auto-channel Selection:
Automatically selecting least congested channel
Bandwidth Measurement:
IP range and bandwidth management
Backup & Restore:
Save & restore settings through Web interface
Diagnosis: IP pinging statistics
Environment & Physical
Temperature Range:
Operating: 0 to 50° C (32° to 122° F)
Storage: -20 to 60° C (-4° to 140° F)
Humidity (non-condensing):
Operating: 90% or less
Storage: 90% of less
Dimensions: Diameter: 4.73” (120mm)
Height: 1.97” (50mm)
Weight: 0.62 lb. (280g)
Certifications: FCC, CE, IC

EnGenius EAP300 Access Point Firmware 1.2.1 driver tags:

EnGenius, supports, mbps, EnGenius EAP300, wds, EAP300 Update, ghz, EAP300, power, mcs, deg, dbm. You may download EAP300-V1.2.1-328.dlf directly. Please write the reviews of the EnGenius EAP300 Access Point Firmware 1.2.1.

Similar EnGenius EAP300 Access Point Firmware 1.2.1 software drivers:

Rosewill RNX-N1MAC Ralink WLAN Driver for Linux - - Frequency Band: 2.400~2.484 GHz , Rosewill RNX-N1MAC Ralink WLAN Driver 1.4.1 - Specifications:, Rosewill RNX-N1MAC Ralink WLAN Driver - - Frequency Band: 2.400~2.484 GHz