D-Link DWL-8200AP Firmware 1.20

Operating systemsOS : Windows All
ManufacturerManufacturer : Others
CreatedCreated : Nov 16, 2006
Size downloadDownloads : 5
Program licensing
Thank you for driver voting...

Problem Resolved:
- Fixed: Can't edit the public community.
- Modified TX power table for 8200 according the table from PM
- Modified to support new Israel.
- No matter the ssid broadcast is enabled or disabled, the AP in WDS (WDS AP as well) mode with WPA-PSK/WPA2-PSK should work properly(WDS can't connect when user disabled ssid Broadcast).
- Task dead(failed reboot,after apply set) when change apmode from WDS to AP by D-View.
- User cann't get wdsclient info at each side,when reboot device on both side at the same time.
- When multi-state enable,and set ssid like "%*",ap will reboot continually.
- [WEB]"Domain Name" in DHCP,which set by AP Manager v1.20 can not display to the Web page.
- The Korea domain should not support turbo mode in 11g band.
- WMM support for each SSID.
- RADIUS Accounting for each SSID.
- support SSID broadcast “enable/disable” for each SSID
- add Output power control for Korea.
- SMTP support in log setting.
- Configuration file extension from CFG to DCF.
- Change default SSID to “dlink”.
- Add command “get/set SNMP” to control snmp state.
- add 3 get power commands for MFG, they are “getswpower/controlpower/targetpower”
- Add fw upgrade protection policy.
- Support 64Bytes username length for radius authentication.
- Support 64 character WEB login username length.
- support Character Set of WEB login username,include "a~z","A~Z","0~9","@", ".", "-" and "_".
- Pop error message when key in unsupported characters in WEB login user name
- Add Telnet command “Get PassPhrase” to display passphrase of wpa-psk
- Add Telnet command “Get RadiusSecret” to display Radius Secret
- add character filter for SSID,0x20~0x7F(ASCII) set is supported.
- remove character filter for SSID setting.
- Modify the Korea channel to [36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 149, 153, 157, 161]

D-Link DWL-8200AP Firmware 1.20 driver tags:

add, D-Link, device, set, D-Link DWL-8200AP, ssid, support, DWL-8200AP. You may download dwl8200AP_firmware_120.tfp directly. Please write the reviews of the D-Link DWL-8200AP Firmware 1.20.

Similar D-Link DWL-8200AP Firmware 1.20 software drivers:

D-Link DWL-800AP Firmware 2.00 - ¤ Fixed connectivity issues with DWL-G650, D-Link DWL-520 Driver b2 - ¤ Fixed encryption issue when in repeater mode, D-Link DWL-G680 Driver 1.20 - The D-Link air DWL-520 is an IEEE 802.11b, Wi-Fi compatible wireless PCI adapter. The DWL-520 provides an integrated PCI solution that will operate within the 2.4 GHz Direct Sequence Spread Spectrum (DSSS) for wireless networks in the home or office environment. The D-Link DWL-520 can operate in either Ad-Hoc mode (Wireless Peer-to-Peer networking without an access point) or Infrastructure mode (Wireless Peer-to-Peer networking using an access point). In addition, the DWL-520 supports 64/128-bit WEP (Wired Equivalent Privacy) Encryption for network security.